Ap2112-3v3-regulator
About the Ap2112-3v3-regulator PCB
Ap2112-3v3-regulator is an open source PCB design by embedrapp, published on GitHub under the MIT license. It is a 2-layer board measuring 60 × 40 mm, with 5 components from 4 distinct parts.
Other key parts include the AP2112K-3.3. By type, the board carries 2 capacitors, 1 IC, 1 connector and 1 resistor.
From the project
Open benchmark for evaluating AI agents on embedded firmware, code repair, schematics, and PCB engineering
This directory contains one known-good submission for every benchmark task plus the validator-adequacy tooling. It is public for reproducibility but used only as a release gate: the validation harness overlays each solution onto a fresh starter and verifies it with the same offline, read-only submission mount used for real scores.
validation/ is excluded from the Docker build context and is not copied into either benchmark image. It must never be mounted into an agent run. The CI and EC2 release gates run it only after the agent and verifier images have been built. Agent networking is…
Main components on the Ap2112-3v3-regulator
Ap2112-3v3-regulator bill of materials (BOM)
5 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 2 | 1uF | C_0805_2012Metric | C1, C2 |
| 1 | 100k | R_0603_1608Metric | R1 |
Ap2112-3v3-regulator design files
The KiCad project lives in the embedrapp/deepee repository on GitHub; these links point at the commit this page was built from.
Ap2112-3v3-regulator: common questions
How big is the Ap2112-3v3-regulator PCB?
The Ap2112-3v3-regulator measures 60 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ap2112-3v3-regulator?
5 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ap2112-3v3-regulator design files?
From the embedrapp/deepee repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Ap2112-3v3-regulator design in my own project?
Yes, under the terms of its MIT license, which embedrapp chose for the repository.
More boards in deepee
Pca9306-i2c level shifter
60 × 40 mm10 parts2LMIT1
Microsd spi adapter
60 × 40 mm7 parts2LMIT1
Ne555-astable
60 × 40 mm7 parts2LMIT1
Max3485-rs485
60 × 40 mm7 parts2LMIT1
Bmp280-environment sensor
60 × 40 mm7 parts2LMIT1
Ina219-current monitor
60 × 40 mm6 parts2LMIT1
Usb c-5v sink
60 × 40 mm6 parts2LMIT1
Sn65hvd230-can
60 × 40 mm6 parts2LMIT1
Mcp9808-breakout
18 × 15 mm6 parts2LMIT1
Ads1115-analog input
60 × 40 mm6 parts2LMIT1
Nrf24-adapter
30 × 25 mm4 parts2LMIT1