Mcp9808-breakout
About the Mcp9808-breakout
Mcp9808-breakout is an open source PCB design by embedrapp, published on GitHub under the MIT license. It is a 2-layer board measuring 18 × 15 mm, with 6 components from 5 distinct parts.
Other key parts include the MCP9808T-E/MS. By type, the board carries 3 resistors, 1 IC, 1 connector and 1 capacitor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Open benchmark for evaluating AI agents on embedded firmware, code repair, schematics, and PCB engineering
This directory contains one known-good submission for every benchmark task plus the validator-adequacy tooling. It is public for reproducibility but used only as a release gate: the validation harness overlays each solution onto a fresh starter and verifies it with the same offline, read-only submission mount used for real scores.
validation/ is excluded from the Docker build context and is not copied into either benchmark image. It must never be mounted into an agent run. The CI and EC2 release gates run it only after the agent and verifier images have been built. Agent networking is…
Main components on the Mcp9808-breakout
Mcp9808-breakout bill of materials (BOM)
6 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP9808T-E/MS | MSOP-8_3x3mm_P0.65mm | U1 |
| 1 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | 100nF | C_0603_1608Metric | C1 |
| 2 | 4.7k | R_0603_1608Metric | R1, R2 |
| 1 | 10k | R_0603_1608Metric | R3 |
Mcp9808-breakout design files
The KiCad project lives in the embedrapp/deepee repository on GitHub; these links point at the commit this page was built from.
Mcp9808-breakout: common questions
How big is the Mcp9808-breakout?
The Mcp9808-breakout measures 18 × 15 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mcp9808-breakout?
6 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mcp9808-breakout design files?
From the embedrapp/deepee repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Mcp9808-breakout design in my own project?
Yes, under the terms of its MIT license, which embedrapp chose for the repository.
More boards in deepee
Pca9306-i2c level shifter
60 × 40 mm10 parts2LMIT1
Microsd spi adapter
60 × 40 mm7 parts2LMIT1
Max3485-rs485
60 × 40 mm7 parts2LMIT1
Bmp280-environment sensor
60 × 40 mm7 parts2LMIT1
Ne555-astable
60 × 40 mm7 parts2LMIT1
Usb c-5v sink
60 × 40 mm6 parts2LMIT1
Sn65hvd230-can
60 × 40 mm6 parts2LMIT1
Ads1115-analog input
60 × 40 mm6 parts2LMIT1
Ina219-current monitor
60 × 40 mm6 parts2LMIT1
Ap2112-3v3-regulator
60 × 40 mm5 parts2LMIT1
Nrf24-adapter
30 × 25 mm4 parts2LMIT1
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979