HardLabs

LMP91000 Breakout Board

emilekelund·LactateStat-Hardware-Resources·LMP91000-Breakout-Board/LMP91000_Breakout_Board.kicad_pcb

LMP91000 Breakout Board layout, top view — open source board by emilekelund

About the LMP91000 Breakout Board

LMP91000 Breakout Board is an open source PCB design by emilekelund, published on GitHub. It is a 2-layer board measuring 26 × 20 mm, with 7 components from 6 distinct parts.

By type, the board carries 2 connectors, 2 capacitors and 2 resistors.

It belongs with the wearables and dev boards & breakouts designs in this gallery.

From the project

This is the hardware resources used in my master thesis: LactateStat: Wearable Electronics and Software for Real-Time Lactate Monitoring in Sweat

This is the hardware resources used in my master thesis: LactateStat: Wearable Electronics and Software for Real-Time Lactate Monitoring in Sweat

The PCB was created using KiCad version 5.1.6 and they were manufactured and assembled by PCBWay.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons…

LMP91000 Breakout Board bill of materials (BOM)

7 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Conn_01x07
J1
1
Conn_01x05
J2
1
LMP91000SD_NOPB
LMP91000
1
0.1U
0.1u
C1
1
1u
C2
2
10K
R1, R2

LMP91000 Breakout Board design files

The KiCad project lives in the emilekelund/LactateStat-Hardware-Resources repository on GitHub; these links point at the commit this page was built from.

LMP91000 Breakout Board: common questions

How big is the LMP91000 Breakout Board?

The LMP91000 Breakout Board measures 26 × 20 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LMP91000 Breakout Board?

7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the LMP91000 Breakout Board design files?

From the emilekelund/LactateStat-Hardware-Resources repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the LMP91000 Breakout Board design in my own project?

The repository has no license, so all rights stay with emilekelund. Use it as a reference, and ask the author before reusing the design.

More boards in LactateStat-Hardware-Resources

Similar boards