Smores pad

emilyahmad·smores-pad·source/smorespad.kicad_pcb

Smores pad PCB layout, top view — open source board by emilyahmad

About the Smores pad PCB

Smores pad is an open source PCB design by emilyahmad, published on GitHub. It is a 2-layer board measuring 45.9 × 57.9 mm, with 8 components from 4 distinct parts.

Other key parts include the XIAO_ESP32C3. By type, the board carries 4 switches, 2 resistors, 1 IC and 1 connector.

It belongs with the keyboards and iot & wireless designs in this gallery.

From the project

A s'mores-themed macropad

Full build logs are in JOURNAL.md, and parts list is in bom.csv.

+ FinalizedMacropad.cpp: the finished firmware + KeySwitchTest.cpp: test sketch that shows key presses on the OLED + TestingOLED.cpp: first OLED test + QMK/: early QMK snippets (not used, since QMK doesn't support the ESP32-C3)

Smores pad, from the project README
From the project README

Main components on the Smores pad

Smores pad bill of materials (BOM)

8 components, 4 distinct parts.

QtyPartRefs
1
XIAO_ESP32C3
U1
1
Conn_01x04
J1
4
SW_Push
SW1, SW2, SW3, SW4
2
4.7K
R1, R2

Smores pad design files

The KiCad project lives in the emilyahmad/smores-pad repository on GitHub; these links point at the commit this page was built from.

Smores pad: common questions

How big is the Smores pad PCB?

The Smores pad measures 45.9 × 57.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Smores pad?

8 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Smores pad design files?

From the emilyahmad/smores-pad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Smores pad design in my own project?

The repository has no license, so all rights stay with emilyahmad. Use it as a reference, and ask the author before reusing the design.

Similar boards