24 open source boards using the XIAO_ESP32C3

Real designs built with the XIAO_ESP32C3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

24 boardsClear filters|Most starred

How designs wire the XIAO_ESP32C3

Read from the KiCad layouts of 21 open source designs, one per repository: what each pin of the XIAO_ESP32C3 connects to, and the resistors, capacitors and other passives placed on it.

  • The D6 pin is left unconnected on 13 of 20 designs (a signal on 7).
  • The D9 pin is left unconnected on 13 of 20 designs (a signal on 6).
D4pin 5Connected to: A connector 35% · not connected 25%
  • Pull-up to 3.3V on 35% · 4.7 kΩ (5)
D5pin 6Connected to: A connector 35% · not connected 25%
  • Pull-up to 3.3V on 35% · 4.7 kΩ (5)
D6pin 7Connected to: Not connected 65% · a signal 35%
D9pin 10Connected to: Not connected 65% · a signal 30%
VCC_3V3pin 12Connected to: 3.3V 60% · not connected 25% · a signal 15%
GNDpin 13Connected to: GND 88%

8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Filabilly humidor by kbob, Receiver by VectorSpaceHQ, Air quality station by V3lectronics and Eel esp32 switch host board v02 by bombarie.

The XIAO_ESP32C3 in open source designs

The gallery holds 24 open source boards using the XIAO_ESP32C3 from 23 GitHub repositories; a typical one measures about 69.1 × 58.2 mm and carries around 15 components.

82% are two-layer designs, the rest use four layers or more, and 21% carry an open source license.

The most starred is Filabilly humidor by kbob.

Microcontrollers on boards using the XIAO_ESP32C3

XIAO_ESP32C3: common questions

Where can I find a XIAO_ESP32C3 reference design?

Each of the 24 boards on this page is a real design using the XIAO_ESP32C3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the XIAO_ESP32C3 D6 pin connected?

The D6 pin is left unconnected on 13 of 20 designs (a signal on 7). Counted from the KiCad layouts of 21 open source designs using the XIAO_ESP32C3.

How is the XIAO_ESP32C3 D9 pin connected?

The D9 pin is left unconnected on 13 of 20 designs (a signal on 6). Counted from the KiCad layouts of 21 open source designs using the XIAO_ESP32C3.

Which microcontrollers do boards using the XIAO_ESP32C3 use?

Most are built on ESP32 (17).

How big is a typical board using the XIAO_ESP32C3?

The median is 69.1 × 58.2 mm, and 82% are two-layer designs.

What is the most popular open source board using the XIAO_ESP32C3?

By GitHub stars, Filabilly humidor by kbob, with 8 stars.

Can I simulate one of these boards using the XIAO_ESP32C3 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part