Kinetic sand table

emirhan-yakar·kinetic-sand-table·hardware/pcb/controller.kicad_pcb

Kinetic sand table PCB layout, top view — open source board by emirhan-yakar

About the Kinetic sand table PCB

Kinetic sand table is an open source PCB design by emirhan-yakar, published on GitHub. It is a 2-layer board measuring 100 × 75 mm, with 25 components from 17 distinct parts.

Other key parts include the PinSocket_1x15_P2.54mm_Vertical, 74AHCT1G125 and PinSocket_2x08_P2.54mm_Vertical. By type, the board carries 7 capacitors, 5 connectors, 4 resistors, 3 ICs, 2 modules and 1 transistor.

From the project

Kart, KiCad olmadan saf Python (gerbonara) ile kod olarak tasarlandı. Yeniden üretmek için:

Kart, KiCad olmadan saf Python (gerbonara) ile kod olarak tasarlandı. Yeniden üretmek için:

Kart artık gerçek bir KiCad 9 projesi olarak da üretiliyor — gerçek footprint'ler, net'ler, GND ground plane ve KiCad'in kendi motoruyla export edilmiş Gerber + STEP.

Main components on the Kinetic sand table

PinSocket_1x15_P2.54mm_Vertical74AHCT1G125PinSocket_2x08_P2.54mm_Vertical

Kinetic sand table bill of materials (BOM)

25 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
PinSocket_1x15_P2.54mm_Vertical
U1L, U1R
1
74AHCT1G125
SOT-23-5
U2
2
PinSocket_2x08_P2.54mm_Vertical
A1, A2
1
AO3401A
SOT-23
Q1
1
TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm
J1
2
TerminalBlock_MaiXu_MX126-5.0-04P_1x04_P5.00mm
J2, J3
2
TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm
J4, J5
1
PinSocket_1x04_P2.54mm_Vertical
BK1
1
DOGRULA
Fuse_1206_3216Metric
F1
1
DOGRULA
D_SOD-323
D1
1
CP_Radial_D10.0mm_P5.00mm
C1
5
100NF
C_0805_2012Metric
C2, C3, C5, C7, C8
1
CP_Radial_D8.0mm_P3.50mm
C6
1
330
R_0805_2012Metric
R1
1
100K
R_0805_2012Metric
R2
1
10K
R_0805_2012Metric
R3
1
R_0805_2012Metric
R4

Kinetic sand table design files

The KiCad project lives in the emirhan-yakar/kinetic-sand-table repository on GitHub; these links point at the commit this page was built from.

Kinetic sand table: common questions

How big is the Kinetic sand table PCB?

The Kinetic sand table measures 100 × 75 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Kinetic sand table?

25 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Kinetic sand table design files?

From the emirhan-yakar/kinetic-sand-table repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Kinetic sand table design in my own project?

The repository has no license, so all rights stay with emirhan-yakar. Use it as a reference, and ask the author before reusing the design.