85 open source boards using the 74AHCT1G125

Real designs built with the 74AHCT1G125, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

85 boardsClear filters|Most starred

How designs wire the 74AHCT1G125

Read from the KiCad layouts of 71 open source designs, one per repository: what each pin of the 74AHCT1G125 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 1 is tied to GND on 63 of 71 designs (a signal on 8).
  • The VCC pin has a decoupling capacitor on 42 of 71 designs, most often 100 nF (then 10 µF).
  • Pin 4 has a series resistor on 41 of 71 designs, most often 330 Ω (then 470 Ω).
Pin 1Connected to: GND 89%
GNDpin 3Connected to: GND 97%
Pin 4Connected to: Signal 100%
  • Series resistor on 58% · 330 Ω (17), 470 Ω (6), 1 kΩ (3)
VCCpin 5Connected to: 5V 92%
  • Decoupling capacitor on 59% · 100 nF (63), 10 µF (4), 1 µF (3)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SST60 - Multi layout 60% by dededecline, Cyclic by tpcarlson, OTTO-main by cester-ino and Fluxpad by sssata.

The 74AHCT1G125 in open source designs

The gallery holds 85 open source boards using the 74AHCT1G125 from 73 GitHub repositories; a typical one measures about 100 × 90 mm and carries around 104 components.

66% are two-layer designs, the rest use four layers or more, and 35% carry an open source license.

The most starred is SST60 - Multi layout 60% by dededecline.

Microcontrollers on boards using the 74AHCT1G125

74AHCT1G125: common questions

Where can I find a 74AHCT1G125 reference design?

Each of the 85 boards on this page is a real design using the 74AHCT1G125. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 74AHCT1G125 pin 1 connected?

Pin 1 is tied to GND on 63 of 71 designs (a signal on 8). Counted from the KiCad layouts of 71 open source designs using the 74AHCT1G125.

What decoupling capacitors do designs use on the 74AHCT1G125 VCC pin?

The VCC pin has a decoupling capacitor on 42 of 71 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 71 open source designs using the 74AHCT1G125.

What resistor goes on the 74AHCT1G125 pin 4?

Pin 4 has a series resistor on 41 of 71 designs, most often 330 Ω (then 470 Ω). Counted from the KiCad layouts of 71 open source designs using the 74AHCT1G125.

What parts are used alongside the 74AHCT1G125?

The USBLC6-2SC6, RP2040, W25Q128JVS, XC6206PXXXMR and AMS1117-3.3 appear in the most repositories here.

Which microcontrollers do boards using the 74AHCT1G125 use?

Most are built on RP2040/RP2350 (25), STM32 (21), ESP32 (15) and Raspberry Pi (3).

How big is a typical board using the 74AHCT1G125?

The median is 100 × 90 mm, and 66% are two-layer designs.

What is the most popular open source board using the 74AHCT1G125?

By GitHub stars, SST60 - Multi layout 60% by dededecline, with 107 stars.

Can I simulate one of these boards using the 74AHCT1G125 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part