Encoder expansion board
emlab-fi·cube_electronics·encoder_expansion_board/encoder_expansion_board.kicad_pcb
About the Encoder expansion board
Encoder expansion board is an open source STM32 PCB design by emlab-fi, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 46.2 × 71.1 mm, with 47 components from 12 distinct parts.
Its main chip is the STM32G031G6Ux, from the STM32 family. Other key parts include the ISL3280ExHZ. By type, the board carries 17 resistors, 10 ICs, 10 capacitors, 5 connectors, 4 diodes and 1 switch.
From the project
Cube electronics - Main Board and Interface Board
The repo currently contains KiCAD source files for the main board, interface board and a tiny sensor head. It also includes all accompanying files, such as BOM.
The supplied makefile uses KiKit to automatically generate all output gerber files for JLCPCB. Just run make in the top level directory to create all output gerbers and zip them in the ./gerber/ folder.
Main components on the Encoder expansion board
Encoder expansion board bill of materials (BOM)
47 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G031G6Ux | QFN-28_4x4mm_P0.5mm | U1 |
| 9 | ISL3280ExHZ | SOT-23-5 | U2, U3, U4, U5, U6, U7, U8, U9 +1 |
| 3 | Conn_01x09 | PinSocket_1x09_P2.54mm_Vertical | J1, J2, J3 |
| 1 | DBG_CON | PinHeader_2x07_P1.27mm_Vertical | J4 |
| 1 | MAIN_BOARD_IO | IDC-Header_2x25_P2.54mm_Vertical | J5 |
| 1 | RST_BTN | SW_SPST_B3U-1000P | SW1 |
| 4 | LED | D_0603_1608Metric | D1, D2, D3, D4 |
| 10 | 470n | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8 +2 |
| 3 | 1M | R_0603_1608Metric | R1, R5, R9 |
| 9 | 120R | R_0603_1608Metric | R2, R3, R4, R6, R7, R8, R10, R11 +1 |
| 1 | 10k | R_0603_1608Metric | R13 |
| 4 | 1k | R_0603_1608Metric | R14, R15, R16, R17 |
Encoder expansion board design files
The KiCad project lives in the emlab-fi/cube_electronics repository on GitHub; these links point at the commit this page was built from.
Encoder expansion board: common questions
What microcontroller does the Encoder expansion board use?
The Encoder expansion board is built around the STM32G031G6Ux, from the STM32 family.
How big is the Encoder expansion board?
The Encoder expansion board measures 46.2 × 71.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Encoder expansion board?
47 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Encoder expansion board design files?
From the emlab-fi/cube_electronics repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Encoder expansion board design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which emlab-fi chose for the repository.
Can I test firmware for the Encoder expansion board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in cube_electronics
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k