Cube Main Board

emlab-fi·cube_electronics·main_board/kicad_project/main_board.kicad_pcb

Cube Main Board layout, top view — open source STM32 board by emlab-fi

About the Cube Main Board

Cube Main Board is an open source STM32 PCB design by emlab-fi, published on GitHub under the CERN-OHL-W-2.0 license. It is a 4-layer board measuring 150 × 120 mm, with 236 components from 63 distinct parts.

Its main chip is the STM32G474VxT, from the STM32 family. Other key parts include the TMC2209, TPS562200, PCA9600DP and USBLC6-2SC6. By type, the board carries 78 capacitors, 78 resistors, 34 diodes, 24 connectors, 9 ICs and 4 test points.

It belongs with the robotics & motion designs in this gallery.

From the project

Cube electronics - Main Board and Interface Board

This is the main control board for Cube.

This source describes Open Hardware and is licensed under the CERN-OHL-W v2.

You may redistribute and modify this source and make products using it under the terms of the CERN-OHL-S v2 (https://ohwr.org/cernohlw_v2.txt).

This source is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN-OHL-W v2 for applicable conditions.

Main components on the Cube Main Board

TMC2209TPS562200PCA9600DPUSBLC6-2SC6STM32G474VxT

Cube Main Board bill of materials (BOM)

236 components, 63 distinct parts.

QtyPartRefs
4
TMC2209
U1, U2, U3, U4
2
TPS562200
U5, U6
1
PCA9600DP
U7
1
USBLC6-2SC6
U8
1
STM32G474VxT
U9
1
ABS06-32.768kHz
Y1
1
DNP
Y2
4
MOTOR
J1, J2, J3, J4
1
PWR_ENTRY
J5
1
12V_HDR
J6
1
3V3_HDR
J7
1
5V_HDR
J8
1
I2C_BUFFERED
J9
1
USB_B_Micro
J10
1
DATA_UART
J11
1
I2C_EXTERNAL
J12
1
DEBUG_HEADER
J13
1
IO1
J14
1
IO7
J15
1
IO2
J16
Show 43 more
QtyPartRefs
1
IO3
J17
1
IO8
J18
1
IO9
J19
1
IO4
J20
1
IO5
J21
1
IO10
J22
1
IO6
J23
1
EXPANSION_HEADER
J24
1
CR2032
BT1
1
SDA_JMP
JP1
1
SCL_JMP
JP2
1
BOOT_SELECT
JP3
1
SW_SPST
SW1
4
DRIVER_TP
TP1, TP2, TP3, TP4
1
PESD12VS2UT
D1
22
PESD3V3S2UT
D2, D3, D10, D13, D14, D17, D18, D20 +14
2
LED_R
D4, D5
2
LED_O
D6, D7
2
LED_G
D8, D9
5
BAT54C
D11, D12, D15, D16, D19
1
3u3
L1
1
4u7
L2
29
100n
C1, C2, C5, C6, C10, C11, C14, C15 +21
4
22n
C3, C12, C21, C30
4
2u2
C4, C13, C22, C31
21
10u
C7, C8, C16, C17, C25, C26, C34, C35 +13
4
100u
C9, C18, C27, C36
2
1m
C37, C38
2
12p5
C64, C65
2
DNP
C66, C67
10
2n2
C69, C70, C71, C72, C73, C74, C75, C76 +2
8
150m
R1, R2, R3, R4, R5, R6, R7, R8
4
10K
R9, R10, R12, R14
1
33K2
R11
1
54K9
R13
1
1M
R15
2
2K2
R16, R17
12
4K7
R18, R19, R32, R37, R38, R45, R46, R53 +4
2
0R
R20, R21
1
150R
R22
28
1K
R23, R24, R25, R26, R27, R28, R29, R30 +20
10
47K
R33, R36, R39, R44, R47, R52, R55, R60 +2
8
150R
RN1, RN2, RN3, RN4, RN5, RN6, RN7, RN8

Cube Main Board design files

The KiCad project lives in the emlab-fi/cube_electronics repository on GitHub; these links point at the commit this page was built from.

Cube Main Board: common questions

What microcontroller does the Cube Main Board use?

The Cube Main Board is built around the STM32G474VxT, from the STM32 family.

How big is the Cube Main Board?

The Cube Main Board measures 150 × 120 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Cube Main Board?

236 components, from 63 distinct parts. The full bill of materials is listed on this page.

Where can I download the Cube Main Board design files?

From the emlab-fi/cube_electronics repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Cube Main Board design in my own project?

Yes, under the terms of its CERN-OHL-W-2.0 license, which emlab-fi chose for the repository.

Can I test firmware for the Cube Main Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in cube_electronics

Similar boards