Carte Base roulante 2024
ENACRobotique·Cartes_Base_roulante·MCC/Carte_Base_roulante_2024.kicad_pcb
About the Carte Base roulante 2024 PCB
Carte Base roulante 2024 is an open source STM32 PCB design by ENACRobotique, published on GitHub. It is a 2-layer board measuring 68 × 84 mm, with 57 components from 32 distinct parts.
Its main chip is the STM32G484RETx, from the STM32 family. By type, the board carries 24 capacitors, 10 resistors, 4 ICs, 3 diodes, 2 LEDs and 1 transistor.
Main components on the Carte Base roulante 2024
Carte Base roulante 2024 bill of materials (BOM)
57 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G484RETx | LQFP-64_10x10mm_P0.5mm | U1 |
| 3 | ~ | IFX9201SG | U2, U3, U6 |
| 1 | IRF7424 | SOIC-8_3.9x4.9mm_P1.27mm | Q2 |
| 1 | ALIM | TerminalBlock_bornier-2_P5.08mm | ALIM1 |
| 1 | DEBUG | Molex_CLIK-Mate_502382-0570_1x05-1MP_P1.25mm_Vertical | DEBUG1 |
| 1 | ENC1 | PinHeader_1x04_P2.54mm_Vertical | ENC 1 |
| 1 | ENC2 | PinHeader_1x04_P2.54mm_Vertical | ENC 2 |
| 1 | ENC3 | PinHeader_1x04_P2.54mm_Vertical | ENC 3 |
| 1 | LSM6DSL | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | IMU1 |
| 1 | ASCO Abracon | Osc_ASCO | QUARTZ1 |
| 1 | SW_Push | SWITCH_DTSM31NV | SWITCH1 |
| 1 | LM3940IMP-3.3 | LM3940IMP | Transfo5->3.3 |
| 1 | R-78E5.0-1.0 | Converter_DCDC_RECOM_R-78E-0.5_THT | Transfo18->5 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | UART4 |
| 1 | USB-C_12pin | USB-C_HRO_C-31-M-12 | USB-C1 |
| 1 | D_Zener | D_SOD-523 | ZENER1 |
| 1 | LED1 | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED1 |
| 1 | LED2 | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED2 |
| 2 | D | Nexperia_CFP3_SOD-123W | D2, D3 |
| 1 | LED_ALIM | LED_0603_1608Metric | D5 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 11 | 100n | C_0603_1608Metric | C1, C3, C5, C7, C8, C9, C10, C14 +3 |
| 3 | 100u | CP_Elec_10x12.5 | C2, C4, C6 |
| 1 | 4.7u | C_0603_1608Metric | C11 |
| 1 | 10n | C_0603_1608Metric | C12 |
| 2 | 1u | C_0603_1608Metric | C13, C15 |
| 1 | 470n | C_0603_1608Metric | C19 |
| 5 | 10u | C_0603_1608Metric | C20, C21, C22, C23, C24 |
| 3 | 10k | R_0805_2012Metric | R1, R2, R4 |
| 1 | 53k | R_0805_2012Metric | R3 |
| 3 | osef | R_0805_2012Metric | R5, R6, R10 |
| 2 | 5.1K | R_0603_1608Metric | R7, R8 |
| 1 | 40K | R_0805_2012Metric | R9 |
Carte Base roulante 2024 design files
The KiCad project lives in the ENACRobotique/Cartes_Base_roulante repository on GitHub; these links point at the commit this page was built from.
Carte Base roulante 2024: common questions
What microcontroller does the Carte Base roulante 2024 use?
The Carte Base roulante 2024 is built around the STM32G484RETx, from the STM32 family.
How big is the Carte Base roulante 2024 PCB?
The Carte Base roulante 2024 measures 68 × 84 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Carte Base roulante 2024?
57 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the Carte Base roulante 2024 design files?
From the ENACRobotique/Cartes_Base_roulante repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Carte Base roulante 2024 design in my own project?
The repository has no license, so all rights stay with ENACRobotique. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Carte Base roulante 2024 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Cartes_Base_roulante
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k