CarteBrushless
ENACRobotique·Cartes_Base_roulante·Brushless/CarteBrushless.kicad_pcb
About the CarteBrushless PCB
CarteBrushless is an open source STM32 PCB design by ENACRobotique, published on GitHub. It is a 2-layer board measuring 100 × 157 mm, with 54 components from 33 distinct parts.
Its main chip is the STM32G484RETx, from the STM32 family. Other key parts include the TCAN332G. By type, the board carries 18 capacitors, 11 resistors, 4 diodes, 3 connectors, 2 ICs and 2 LEDs.
Main components on the CarteBrushless
CarteBrushless bill of materials (BOM)
54 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G484RETx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | TCAN332G | SOT-23-8 | U2 |
| 1 | IRF7424 | SOIC-8_3.9x4.9mm_P1.27mm | Q2 |
| 3 | Conn_01x03_Pin | Molex_PicoBlade_53398-0371_1x03-1MP_P1.25mm_Vertical | J1, J2, J3 |
| 1 | ALIM | TerminalBlock_bornier-2_P5.08mm | ALIM1 |
| 1 | DEBUG | Molex_PicoBlade_53398-0571_1x05-1MP_P1.25mm_Vertical | DEBUG1 |
| 1 | LSM6DSL | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | IMU1 |
| 3 | MOT3 | AMASS_XT30UPB-F_1x02_P5.0mm_Vertical | MOT1, MOT2, MOT3 |
| 1 | ASCO Abracon | Osc_ASCO | QUARTZ1 |
| 1 | SW_Push | SWITCH_DTSM31NV | SWITCH1 |
| 1 | LM3940IMP-3.3 | LM3940IMP | Transfo5->3.3 |
| 1 | R-78E5.0-1.0 | Converter_DCDC_RECOM_R-78E-0.5_THT | Transfo18->5 |
| 1 | Conn_01x03_Pin | Molex_PicoBlade_53398-0371_1x03-1MP_P1.25mm_Vertical | UART1 |
| 1 | USB-C_12pin | USB-C_HRO_C-31-M-12 | USB-C1 |
| 1 | D_Zener | D_SOD-523 | ZENER1 |
| 1 | LED1 | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED1 |
| 1 | LED2 | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED2 |
| 3 | D | Nexperia_CFP3_SOD-123W | D1, D2, D3 |
| 1 | LED_ALIM | LED_0603_1608Metric | D5 |
| 8 | 100n | C_0603_1608Metric | C7, C8, C9, C10, C14, C16, C17, C18 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.7u | C_0603_1608Metric | C11 |
| 1 | 10n | C_0603_1608Metric | C12 |
| 2 | 1u | C_0603_1608Metric | C13, C15 |
| 1 | 470n | C_0603_1608Metric | C19 |
| 4 | 10u | C_0603_1608Metric | C20, C21, C22, C24 |
| 1 | 100u | CP_EIA-7343-31_Kemet-D_Pad2.25x2.55mm_HandSolder | C23 |
| 2 | 120 | R_0805_2012Metric | R1, R11 |
| 2 | 10k | R_0805_2012Metric | R2, R4 |
| 1 | 53k | R_0805_2012Metric | R3 |
| 1 | 850 | R_0805_2012Metric | R5 |
| 2 | 500 | R_0805_2012Metric | R6, R10 |
| 2 | 5.1K | R_0603_1608Metric | R7, R8 |
| 1 | 40K | R_0805_2012Metric | R9 |
CarteBrushless design files
The KiCad project lives in the ENACRobotique/Cartes_Base_roulante repository on GitHub; these links point at the commit this page was built from.
CarteBrushless: common questions
What microcontroller does the CarteBrushless use?
The CarteBrushless is built around the STM32G484RETx, from the STM32 family.
How big is the CarteBrushless PCB?
The CarteBrushless measures 100 × 157 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CarteBrushless?
54 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the CarteBrushless design files?
From the ENACRobotique/Cartes_Base_roulante repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CarteBrushless design in my own project?
The repository has no license, so all rights stay with ENACRobotique. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the CarteBrushless without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Cartes_Base_roulante
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k