ADF4351

EObianom·ADF4351·hardware/Version_3.0/Version_3.0.kicad_pcb

ADF4351 PCB layout, top view — open source board by EObianom

About the ADF4351 PCB

ADF4351 is an open source PCB design by EObianom, published on GitHub under the MIT license. It is a 2-layer board measuring 21.4 × 21.7 mm, with 45 components from 20 distinct parts.

Other key parts include the ADF4351. By type, the board carries 26 capacitors, 10 resistors, 3 connectors, 3 inductors, 1 IC and 1 crystal.

From the project

This repository is for ADF4351 registory calculation and hardware design.

A complete open-source RF signal generation suite featuring a lightweight C++ driver and a custom open-hardware PCB design in KiCad for the Analog Devices ADF4351 wideband frequency synthesizer (35 MHz – 4.4 GHz).

// Helper function to send 32-bit register words over hardware SPI void writeRegister(uint32t regData) { digitalWrite(CSPIN, LOW); SPI.beginTransaction(SPISettings(5000000, MSBFIRST, SPIMODE0)); SPI.transfer32(regValue); SPI.endTransaction(); digitalWrite(CSPIN, HIGH); delayMicroseconds(1); }

ADF4351, from the project README
From the project README

Main components on the ADF4351

ADF4351 bill of materials (BOM)

45 components, 20 distinct parts.

QtyPartRefs
1
ADF4351
U1
1
SG-5032CAN
Y1
2
Conn_01x05
J1, J2
1
Conn_Coaxial
J3
1
LED
D1
1
1.9nH
L1
2
7.5nH
L2, L3
9
0.1uF
C1, C3, C4, C7, C8, C13, C18, C20 +1
8
10pF
C2, C5, C6, C9, C10, C19, C21, C23
4
1nF
C11, C15, C16, C17
2
120pF
C12, C14
1
2.7nF
C24
1
47nF
C25
1
680pF
C26
1
100
R1
5
10K
R2, R3, R4, R5, R6
1
50
R7
1
1K
R8
1
4.7K
R9
1
360
R10

ADF4351 design files

The KiCad project lives in the EObianom/ADF4351 repository on GitHub; these links point at the commit this page was built from.

ADF4351: common questions

How big is the ADF4351 PCB?

The ADF4351 measures 21.4 × 21.7 mm, has 2 copper layers and is 1.600198 mm thick.

How many components are on the ADF4351?

45 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the ADF4351 design files?

From the EObianom/ADF4351 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ADF4351 design in my own project?

Yes, under the terms of its MIT license, which EObianom chose for the repository.