17 open source boards using the ADF4351
Real designs built with the ADF4351, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Uncut Gem
QuantumVillage
82.1 × 82.1 mm110 parts2LAGPL-3.0197AVR/Arduino
Wavelab-24G-Addon module
PA0MHE
118.5 × 94.5 mm187 parts2LMIT5Spectrum analyser-Front-End
richardhosking
195 × 60 mm144 parts2LNo license2OldSpecAnFrontEnd
richardhosking
98.3 × 56.3 mm149 parts2LNo license1AVR/Arduino
Hauptplatine
JoshCrouch
220 × 160.5 mm504 parts4LNo license0Main v2
JaxRaffnix
204.7 × 68.5 mm189 parts4LNo license0AVR/Arduino
Synthesizer-VHF
wa1hco
39 × 37.7 mm83 parts4LGPL-3.00STM32
Mini-Spectrum-Analyzer-
Dhruv2212-star
50 × 70 mm61 parts4LNo license0ADF4351
EObianom
21.4 × 21.7 mm45 parts2LMIT0CW-Radar-2.4GHz
AGH-Micro
37.6 × 15 mm36 parts4LMIT0- schematic only · 60 parts
DroidRadio
StayAlone01
60 partsApache-2.00 ESP32
Uncut Gem bkup
QuantumVillage
82.1 × 82.1 mm78 parts2LAGPL-3.0197Firstmixer
richardhosking
195 × 60 mm144 parts2LNo license1Hardware
JoshCrouch
20 × 14 mm3 parts6LNo license0ESP32
DiamondGeezer
QuantumVillage
101 × 97.4 mm32 parts2LAGPL-3.0197SpecAnFrontEnd
richardhosking
195 × 60 mm144 parts2LNo license1FrontEndMain
richardhosking
195 × 60 mm111 parts2LNo license1
How designs wire the ADF4351
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the ADF4351 connects to, and the resistors, capacitors and other passives placed on it.
- The CPOUT pin has a series resistor on 8 of 10 designs, most often 1 kΩ (then 680 Ω).
- The TEMP pin has a capacitor to GND on 8 of 10 designs, most often 100 nF (then 10 pF).
- The VCOM pin has a capacitor to GND on 8 of 10 designs, most often 10 pF (then 100 nF).
- The VREF pin has a capacitor to GND on 8 of 10 designs, most often 10 pF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CLKpin 1 | Connected to: A connector 50%, the microcontroller 20% · not connected 30% |
|
| DATApin 2 | Connected to: A connector 60%, the microcontroller 30% · not connected 20% |
|
| LEpin 3 | Connected to: A connector 40%, the microcontroller 30% · not connected 20% |
|
| CEpin 4 | Connected to: A connector 40%, the microcontroller 20% |
|
| SWpin 5 | Connected to: Not connected 50% · a signal 50% |
|
| VPpin 6 | Connected to: 3.3V 70% · not connected 20% |
|
| CPOUTpin 7 | Connected to: Signal 80% · not connected 20% |
|
| CPGNDpin 8 | Connected to: GND 80% | — |
| AGNDpin 9 | Connected to: GND 90% | — |
| AVDDpin 10 | Connected to: 3.3V 70% · not connected 20% |
|
| AGNDVCOpin 11, 18, 21 | Connected to: GND 87% | — |
| RF_OUT_A+pin 12 | Connected to: Signal 80% · not connected 20% |
|
| RF_OUT_A-pin 13 | Connected to: Signal 70% · not connected 30% |
|
| RF_OUT_B+pin 14 | Connected to: Not connected 90% | — |
| RF_OUT_B-pin 15 | Connected to: Not connected 90% | — |
| VVCOpin 16, 17 | Connected to: 3.3V 60% · not connected 15% · a signal 20% |
|
| TEMPpin 19 | Connected to: Signal 80% |
|
| VTUNEpin 20 | Connected to: Signal 80% · not connected 20% |
|
| RSETpin 22 | Connected to: Signal 70% · not connected 30% |
|
| VCOMpin 23 | Connected to: Signal 80% · not connected 20% |
|
| VREFpin 24 | Connected to: Signal 80% · not connected 20% |
|
| LDpin 25 | Connected to: Not connected 50% · a signal 50% |
|
| DGNDpin 27 | Connected to: GND 80% · not connected 20% | — |
| DVDDpin 28 | Connected to: 3.3V 70% · not connected 20% |
|
| REFINpin 29 | Connected to: Signal 90% |
|
| SDGNDpin 31 | Connected to: GND 90% | — |
| SDVDDpin 32 | Connected to: 3.3V 70% · a signal 20% |
|
| EPpin 33 | Connected to: GND 90% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DiamondGeezer by QuantumVillage, Wavelab-24G-Addon module by PA0MHE, Spectrum analyser-Front-End-KICAD by richardhosking and Firstmixer by richardhosking.
The ADF4351 in open source designs
The gallery holds 17 open source boards using the ADF4351 from 11 GitHub repositories; a typical one measures about 99.7 × 60 mm and carries around 110 components.
63% are two-layer designs, the rest use four layers or more, and 47% carry an open source license.
The most starred is Uncut Gem by QuantumVillage.
Microcontrollers on boards using the ADF4351
What boards using the ADF4351 are built for
ADF4351: common questions
Where can I find a ADF4351 reference design?
Each of the 17 boards on this page is a real design using the ADF4351. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the ADF4351 CPOUT pin?
The CPOUT pin has a series resistor on 8 of 10 designs, most often 1 kΩ (then 680 Ω). Counted from the KiCad layouts of 10 open source designs using the ADF4351.
How is the ADF4351 TEMP pin connected?
The TEMP pin has a capacitor to GND on 8 of 10 designs, most often 100 nF (then 10 pF). Counted from the KiCad layouts of 10 open source designs using the ADF4351.
How is the ADF4351 VCOM pin connected?
The VCOM pin has a capacitor to GND on 8 of 10 designs, most often 10 pF (then 100 nF). Counted from the KiCad layouts of 10 open source designs using the ADF4351.
What parts are used alongside the ADF4351?
The ADL5801, ADP150, LTC5510, MMG38151 and SiT5156 appear in the most repositories here.
Which microcontrollers do boards using the ADF4351 use?
Most are built on AVR/Arduino (3), ESP32 (3) and STM32 (1).
How big is a typical board using the ADF4351?
The median is 99.7 × 60 mm, and 63% are two-layer designs.
What is the most popular open source board using the ADF4351?
By GitHub stars, Uncut Gem by QuantumVillage, with 197 stars.
Can I simulate one of these boards using the ADF4351 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.