Interposer
EpicQuestBio·MR1·Interposer/Interposer.kicad_pcb
About the Interposer PCB
Interposer is an open source PCB design by EpicQuestBio, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 55 × 52 mm, with 27 components from 16 distinct parts.
Other key parts include the ADA4940-1ACPZ-RL, AD4011BCPZ-RL7 and LP5907MFX-1.8/NOPB. By type, the board carries 12 resistors, 8 capacitors, 3 ICs, 1 transistor, 1 connector and 1 diode.
From the project
MR1 specs
The MR1 Nanopore Reader is an open-source, ultra-low-noise solid-state and biological nanopore sequencer flow cell, low-current transimpedance amplifier, and automated fluidic control system. It integrates high-precision parametric CAD models (build123d), ultra-low-leakage analog front-end electronics (KiCad), an automated dual-pump fluidic handler, and an ESP32-S3 high-speed continuous streaming firmware stack.
Main components on the Interposer
Interposer bill of materials (BOM)
27 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ADA4940-1ACPZ-RL ADA4940-1xCP | LFCSP-16-1EP_3x3mm_P0.5mm_EP1.3x1.3mm_ThermalVias | U6 |
| 1 | AD4011BCPZ-RL7 AD40xxBRMZ | MSOP-10_3x3mm_P0.5mm | U13 |
| 1 | LP5907MFX-1.8/NOPB LP5907MFX-1.8 | SOT-23-5 | U14 |
| 1 | 2N7002 | SOT-23 | Q3 |
| 1 | Conn_01x14_MountingPin | Amphenol_F32R-1A7x1-11014_1x14-1MP_P0.5mm_Horizontal | J7 |
| 1 | PogoPin_SpringHeader_6Pin_Array | PogoPin_Target_6Pin_Distributed | J_POGO1 |
| 1 | MBR0540L-TP MBR0540 | D_SOD-123 | D82 |
| 1 | 100nF | C_0805_2012Metric | C9 |
| 1 | JMK107C6475KA-T 4.7u | C_0402_1005Metric | C11 |
| 4 | 100nF | C_0402_1005Metric | C31, C32, C33, C39 |
| 1 | GRM21BR61H106KE43K 10u | C_0402_1005Metric | C35 |
| 1 | 1nF | C_0402_1005Metric | C41 |
| 2 | 100k | R_0402_1005Metric | R14, R15 |
| 2 | RC0402JR-0727RL 27 | R_0402_1005Metric | R27, R41 |
| 4 | RC0402JR-0727RL 49.9 | R_0402_1005Metric | R28, R29, R30, R31 |
| 4 | 499 (0.1%) | R_0402_1005Metric | R43, R44, R45, R46 |
Interposer design files
The KiCad project lives in the EpicQuestBio/MR1 repository on GitHub; these links point at the commit this page was built from.
Interposer: common questions
How big is the Interposer PCB?
The Interposer measures 55 × 52 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the Interposer?
27 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Interposer design files?
From the EpicQuestBio/MR1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Interposer design in my own project?
Yes, under the terms of its AGPL-3.0 license, which EpicQuestBio chose for the repository.