Amplifier
EpicQuestBio·MR1·Amplifier/Amplifier.kicad_pcb
About the Amplifier PCB
Amplifier is an open source PCB design by EpicQuestBio, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 55 × 52 mm, with 39 components from 24 distinct parts.
Other key parts include the LMP7721, ADA4940-1ACPZ-RL, AD4011BCPZ-RL7, LP5907MFX-1.8/NOPB and LTC6268IS8#TRPBF. By type, the board carries 18 resistors, 12 capacitors, 5 ICs, 1 transistor, 1 connector and 1 diode.
It belongs with the audio designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
MR1 specs
The MR1 Nanopore Reader is an open-source, ultra-low-noise solid-state and biological nanopore sequencer flow cell, low-current transimpedance amplifier, and automated fluidic control system. It integrates high-precision parametric CAD models (build123d), ultra-low-leakage analog front-end electronics (KiCad), an automated dual-pump fluidic handler, and an ESP32-S3 high-speed continuous streaming firmware stack.
Main components on the Amplifier
Amplifier bill of materials (BOM)
39 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMP7721 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | ADA4940-1ACPZ-RL ADA4940-1xCP | LFCSP-16-1EP_3x3mm_P0.5mm_EP1.3x1.3mm_ThermalVias | U6 |
| 1 | AD4011BCPZ-RL7 AD40xxBRMZ | MSOP-10_3x3mm_P0.5mm | U13 |
| 1 | LP5907MFX-1.8/NOPB LP5907MFX-1.8 | SOT-23-5 | U14 |
| 1 | LTC6268IS8#TRPBF LTC6268xS8 | SO-8_3.9x4.9mm_P1.27mm | U16 |
| 1 | 2N7002 | SOT-23 | Q3 |
| 1 | Conn_01x14_MountingPin | Amphenol_F32R-1A7x1-11014_1x14-1MP_P0.5mm_Horizontal | J7 |
| 1 | PogoPin_SpringHeader_6Pin_Array | PogoPin_Target_6Pin_Distributed | J_POGO1 |
| 1 | MBR0540L-TP MBR0540 | D_SOD-123 | D82 |
| 1 | 2pF | C_0402_1005Metric | C1 |
| 3 | 100nF | C_0805_2012Metric | C6, C9, C20 |
| 1 | JMK107C6475KA-T 4.7u | C_0402_1005Metric | C11 |
| 5 | 100nF | C_0402_1005Metric | C19, C31, C32, C33, C39 |
| 1 | GRM21BR61H106KE43K 10u | C_0402_1005Metric | C35 |
| 1 | 1nF | C_0402_1005Metric | C41 |
| 1 | 1M | R_0402_1005Metric | R1 |
| 2 | 1K | R_0805_2012Metric | R3, R5 |
| 1 | 100 | R_0402_1005Metric | R4 |
| 1 | 1K | R_0402_1005Metric | R6 |
| 1 | 100 | R_0805_2012Metric | R8 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 100k | R_0402_1005Metric | R14, R15 |
| 2 | RC0402JR-0727RL 27 | R_0402_1005Metric | R27, R41 |
| 4 | RC0402JR-0727RL 49.9 | R_0402_1005Metric | R28, R29, R30, R31 |
| 4 | 499 (0.1%) | R_0402_1005Metric | R43, R44, R45, R46 |
Amplifier design files
The KiCad project lives in the EpicQuestBio/MR1 repository on GitHub; these links point at the commit this page was built from.
- LayoutAmplifier/Amplifier.kicad_pcb
- SchematicAmplifier/Amplifier.kicad_sch
Amplifier: common questions
How big is the Amplifier PCB?
The Amplifier measures 55 × 52 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the Amplifier?
39 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Amplifier design files?
From the EpicQuestBio/MR1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Amplifier design in my own project?
Yes, under the terms of its AGPL-3.0 license, which EpicQuestBio chose for the repository.
More boards in MR1
Earlier revisions in the repo: amplifier
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687