NFC
Erox-02·NFC·kicad/nfc.kicad_pcb
About the NFC PCB
NFC is an open source PCB design by Erox-02, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 72.6 × 46.1 mm, with 8 components from 6 distinct parts.
Other key parts include the NT3H2111W0FHKH. By type, the board carries 3 resistors, 1 IC, 1 connector, 1 diode and 1 inductor.
From the project
The integrated planar antenna harvests power from the phone's magnetic field to light up the led placed in front side pcb layer while simltaniously doing nfc connection with phone/other device . Also i have left some traces for later i2c uses .
The integrated planar antenna harvests power from the phone's magnetic field to light up the led placed in front side pcb layer while simltaniously doing nfc connection with phone/other device . Also i have left some traces for later i2c uses .
Check out my project's build video's on forge
you can re use my antenna and add custom footprint for others , or you can swap my name and qr with your own :D .

Main components on the NFC
NFC bill of materials (BOM)
8 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NT3H2111W0FHKH NXP(恩智浦) | XQFN-8_L1.6-W1.6-P0.50-BL_NT3H2111W0FHKH | U1 |
| 1 | Conn_01x05_Pin | Hirose_DF13-05P-1.25DSA_1x05_P1.25mm_Vertical | Con1 |
| 1 | 180 nf | C_0603_1608Metric | Cap1 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 1 | L_Small | ftprnt | L1 |
| 3 | C862232 5k ohm | R_0603_1608Metric | R1, R2, R3 |
NFC design files
The KiCad project lives in the Erox-02/NFC repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/nfc.kicad_pcb
- Schematickicad/nfc.kicad_sch
- BOMBOM.csv
NFC: common questions
How big is the NFC PCB?
The NFC measures 72.6 × 46.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the NFC?
8 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the NFC design files?
From the Erox-02/NFC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the NFC design in my own project?
Yes, under the terms of its GPL-3.0 license, which Erox-02 chose for the repository.