Memory Board
About the Memory Board
Memory Board is an open source PCB design by esl-epfl, published on GitHub. It is a 6-layer board measuring 15.2 × 10.8 mm, with 11 components from 4 distinct parts.
Other key parts include the MX25U12832FZNI02-TR and MX25U25643GZ4I00-T. By type, the board carries 7 resistors, 2 ICs and 2 capacitors.
It belongs with the wearables designs in this gallery.
From the project
Modular hardware platform based on the RISC-V X-HEEP family architecture developed at ESL, targeting ultra-low-power consumption and miniaturization, facilitating the creation of wearable devices for clinical trials
A collection of compact, power-efficient PCB modules designed for rapid prototyping and development of wearable healthcare devices, with a focus on biosignal acquisition.
X-MODs provides a modular hardware approach that bridges the gap between fully custom designs and off-the-shelf solutions. The system consists of four specialized modules and their corresponding debug boards, enabling quick prototyping while maintaining the small form factor required for wearable applications.
Main components on the Memory Board
Memory Board bill of materials (BOM)
11 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MX25U12832FZNI02-TR | 8-WSON_DUAL_(6x5mm)_8x6mn | U1 |
| 1 | MX25U25643GZ4I00-T | 8-WSON_DUAL_6x5mm_(8x6mn) | U2 |
| 2 | GRM155R71A104JA01D 100n 10V | C0402 | C1, C2 |
| 7 | CRCW040210K0FKEDHP 10K0 | R0402 | R1, R2, R3, R4, R5, R7, R8 |
Memory Board design files
The KiCad project lives in the esl-epfl/X-MODs repository on GitHub; these links point at the commit this page was built from.
Memory Board: common questions
How big is the Memory Board?
The Memory Board measures 15.2 × 10.8 mm, has 6 copper layers and is 0.8 mm thick.
How many components are on the Memory Board?
11 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Memory Board design files?
From the esl-epfl/X-MODs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Memory Board design in my own project?
The repository has no license, so all rights stay with esl-epfl. Use it as a reference, and ask the author before reusing the design.
More boards in X-MODs
Similar boards
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
ISA adapter
102.9 × 96.8 mm12 parts2LGPL-2.0800
Open smartwatch light
Open-Smartwatch
36.1 × 36.1 mm51 parts4LGPL-3.0246
OpenESC-20x20
OpenDrone-hw
31.2 × 33 mm180 parts6LCERN-OHL-S-2.0243
Open smartwatch gps
45 × 41 mm67 parts4LGPL-3.0241