Inaboard
About the Inaboard PCB
Inaboard is an open source PCB design by etf-lth, published on GitHub. It is a 2-layer board measuring 30 × 52 mm, with 16 components from 7 distinct parts.
Other key parts include the INA193. By type, the board carries 6 resistors, 4 capacitors, 3 connectors and 2 ICs.
From the project
Rasdaq Raspberry Pi Data Acquisition: Hardware, Firmware, Tools
Rasdaq is a 8-channel 16-bit high-speed ADC solution using the Raspberry Pi, with current measurement adapters. Rasdaq was developed by ETF (The Student’s Association for Applied Electronics at the Faculty of Engineering (LTH), Lund University, Sweden) for academic research in power efficiency of graphic accelerators (GPUs).
An illustrated introduction is available here: http://etf.nu/projects/rasdaq
Main components on the Inaboard
Inaboard bill of materials (BOM)
16 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | INA193 | SOT23-5 | U1, U2 |
| 2 | CONN_2 | bornier2 | P1, P3 |
| 1 | CONN_5X2 | PIN_ARRAY_5x2 | P2 |
| 1 | P*** | 1pin | 1PIN |
| 4 | C | SM0805 | C1, C2, C3, C4 |
| 4 | R | SM0805 | R1, R3, R4, R6 |
| 2 | R | SM2512 | R2, R5 |
Inaboard design files
The KiCad project lives in the etf-lth/rasdaq repository on GitHub; these links point at the commit this page was built from.
Inaboard: common questions
How big is the Inaboard PCB?
The Inaboard measures 30 × 52 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Inaboard?
16 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Inaboard design files?
From the etf-lth/rasdaq repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Inaboard design in my own project?
The repository has no license, so all rights stay with etf-lth. Use it as a reference, and ask the author before reusing the design.
