STM32-CSK-Module

ethanharstad·STM32-CSK-Module·Hardware/STM32-CSK-Module.kicad_pcb

STM32-CSK-Module layout, top view — open source STM32 board by ethanharstad

About the STM32-CSK-Module

STM32-CSK-Module is an open source STM32 PCB design by ethanharstad, published on GitHub. It is a 2-layer board measuring 229.7 × 182.6 mm, with 28 components from 13 distinct parts.

Its main chip is the STM32F417VGT, from the STM32 family. Other key parts include the S34ML02G104T. By type, the board carries 19 capacitors, 3 resistors, 2 ICs, 1 connector and 1 inductor.

It belongs with the science & space designs in this gallery.

From the project

STM32 based processor board for the CubeSat kit motherboard

STM32 based processor board for the CubeSat kit motherboard

Uses the Aerodyne Labs KiCad library https://github.com/aerodynelabs/kicadlib

Main components on the STM32-CSK-Module

STM32F417VGTS34ML02G104T

STM32-CSK-Module bill of materials (BOM)

28 components, 13 distinct parts.

QtyPartRefs
1
STM32F417VGT
U1
1
S34ML02G104T
U2
1
Conn_Cortex-JTAG-10
J1
1
Conn_Cubesat-PPM
H1
1
VAL**
MECH-HOLE220
1
Ferrite
FB1
11
0.1uF
C1, C2, C5, C6, C7, C8, C10, C12 +3
1
1uF
C3
1
4.7uF
C4
2
2.2uF
C9, C11
4
Capacitor
C14, C15, C16, C17
1
10k
R1
2
0
R2, R3

STM32-CSK-Module design files

The KiCad project lives in the ethanharstad/STM32-CSK-Module repository on GitHub; these links point at the commit this page was built from.

STM32-CSK-Module: common questions

What microcontroller does the STM32-CSK-Module use?

The STM32-CSK-Module is built around the STM32F417VGT, from the STM32 family.

How big is the STM32-CSK-Module?

The STM32-CSK-Module measures 229.7 × 182.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32-CSK-Module?

28 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the STM32-CSK-Module design files?

From the ethanharstad/STM32-CSK-Module repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the STM32-CSK-Module design in my own project?

The repository has no license, so all rights stay with ethanharstad. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32-CSK-Module without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards