286 open source boards in Science & space
CubeSats, telescopes, radiation detectors and scientific instruments. Every board here is a public GitHub project with its KiCad files, read for size, layers and parts. Pick one close to your design and simulate its firmware on HardLabs before you build it.
STM32
Main
apoluekt
73 × 139 mm121 parts2LCERN-OHL-P-2.0407PiFinder4
brickbots
98 × 75 mm150 parts4LGPL-3.0250STM32
EPS
rgw3d
85 × 85 mm629 parts4LGPL-3.0157STM32
Explorer
anyshake
100 × 100 mm244 parts2LCustom license98Fox-1-MPPT
FaradayRF
95 × 95 mm453 parts4LCustom license62AVR/Arduino
Arduino NMR 5.4
SoukeyCircuits
90 × 79 mm126 parts4LGPL-3.055ESP32
Openeew sensor
openeew
75 × 50 mm101 parts2LApache-2.049AVR/Arduino
Entropy32-Plus
captainchapster
53 × 63 mm34 parts2LMIT37AVR/Arduino
Tentacle
whitebox-labs
146.1 × 53.3 mm63 parts2LNo license32Open spectrometer
tomkinsc
63.6 × 67.5 mm75 partsNo license30Artemis hardware
hsfl
95.9 × 90.2 mm32 parts2LMIT29Oresat c3-hardware
oresat
99.8 × 94.6 mm347 parts4LCERN-OHL-S-2.026Raspberry Pi
Blackwing cm5-payload v1
nihil-space
90.2 × 95.9 mm88 parts6LCERN-OHL-S-2.026STM32
SC-STM32L412K8
Maniak003
31.6 × 15.1 mm69 parts2LGPL-3.026Notecarrier-B
Safecast
44.7 × 31.6 mm33 parts2LNo license23Treadmill Illumination 1206
reiserlab
56 × 34 mm9 parts2LCERN-OHL-W-2.021RP2040/RP2350
OpenGammaKit
vikulin
93.5 × 36.5 mm67 parts2LGPL-3.019Seismos 5CoreStencil
ReSummit
147 × 78 mm80 parts2LGPL-3.017Safepulse
Safecast
40.6 × 20.8 mm76 parts4LNo license12Pimoco
mlnoga
172.2 × 82.8 mm18 parts2LGPL-3.011S-Band-Antenna
ICDT-Inatel-Cubesat-Design-Team
82.4 × 89.4 mm1 parts2LCERN-OHL-W-2.011STM32
DataProcessingUnit
RobertGawron
79.8 × 55 mm56 parts2LGPL-3.010ESP32
ESP32Focuser hardware
simonachmueller
85.5 × 77.5 mm11 parts2LGPL-3.010CubeSat-Radio
SFUSatClub
95.9 × 90.2 mm280 parts4LNo license9Avionics payload
usfsoar
78 × 78 mm31 parts2LNo license9STM32
Eps
OSUSat
80 × 80 mm357 parts6LMIT8TI MSP430/CC
Octoray VFD
slomkowski
160 × 112.4 mm121 parts2LMIT8Sipm linear s14160
OpenSiPM
90.8 × 68.9 mm205 parts4LNo license7AVR/Arduino
SPACEDOS02
UniversalScientificTechnologies
38 × 200 mm120 parts2LGPL-3.07IQ Modulator
antonjan
39.5 × 46 mm72 parts2LGPL-3.07TI MSP430/CC
Big Red Satellite Flight Computer
Big-Red-Sat
81.1 × 75 mm243 parts4LCC-BY-SA-4.06BGeigieIntegrated
IRNAS
66.8 × 104.8 mm86 parts2LCustom license6Microchip SAM
ATmega SAT
spel-uchile
96 × 89.9 mm65 parts2LNo license6EdisonPC104
spel-uchile
96 × 92 mm24 parts2LNo license6Pci104-template
guorbit
95.9 × 90.2 mm2 parts2LNo license6AVR/Arduino
SPACEDOS01
UniversalScientificTechnologies
93.5 × 48.2 mm79 parts2LGPL-3.05
Open source science and space boards at a glance
The gallery holds 286 open source science and space boards from 153 GitHub repositories; a typical one measures about 85 × 76.5 mm and carries around 43 components.
70% are two-layer designs, the rest use four layers or more, and 54% carry an open source license.
The most starred is Main by apoluekt.
Parts most used on science and space boards
Microcontrollers on science and space boards
Open source science and space boards: common questions
Where can I find open source science and space boards?
This page lists 286, each read from its KiCad files on GitHub: board size, layers, the full parts list and a render of the PCB, with links to the original repository.
What parts are most common on science and space boards?
The USBLC6-2SC6, AMS1117-3.3, OPA2314, TS5A4594 and LM358 appear in the most repositories here.
Which microcontrollers do science and space boards use?
Most are built on STM32 (48), AVR/Arduino (18), ESP32 (15) and RP2040/RP2350 (12).
How big is a typical science or space board?
The median is 85 × 76.5 mm, and 70% are two-layer designs.
What is the most popular open source science or space board?
By GitHub stars, Main by apoluekt, with 407 stars.
Can I simulate one of these science and space boards before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.