Breadboard io
About the Breadboard io PCB
Breadboard io is an open source PCB design by everyday-dev, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 33 × 19.1 mm, with 29 components from 6 distinct parts.
By type, the board carries 16 resistors, 4 transistors, 4 switches, 4 diodes and 1 connector.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
🍞 A small footprint design used to easily add a few push-buttons and LEDs to a breadboard
breadboard-io makes it easy to connect 4 LEDs and 4 push-buttons to a broadboard (All signals are active high controls). Provide VCC, GND and your signal wires to other circuitry or microcontroller and you're ready to go. The getting started guide and hardware documentation for this board is available at os.everydaydev.io. If you'd like to build one yourself, the latest Gerber files and schematics can be found in the Release section on Github.
Breadboard io bill of materials (BOM)
29 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | DMN3023L-7 Diodes Incorporated | SOT-23 | Q1, Q2, Q3, Q4 |
| 1 | 68016-410HLF Amphenol ICC (FCI) | PinHeader_1x10_P2.54mm_Horizontal | J1 |
| 4 | EVQ-P7A01P SW0 Panasonic | Panasonic_EVQPUJ_EVQPUA | SW1, SW2, SW3, SW4 |
| 4 | 150060VS55040 G Würth Elektronik | LED_0603_1608Metric | D1, D2, D3, D4 |
| 12 | RC0402FR-0710KL 10k YAGEO | R_0402_1005Metric | R1, R2, R3, R4, R9, R10, R11, R12 +4 |
| 4 | RC0402FR-07330RL 330 YAGEO | R_0402_1005Metric | R5, R6, R7, R8 |
Breadboard io design files
The KiCad project lives in the everyday-dev/breadboard-io repository on GitHub; these links point at the commit this page was built from.
Breadboard io: common questions
How big is the Breadboard io PCB?
The Breadboard io measures 33 × 19.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Breadboard io?
29 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Breadboard io design files?
From the everyday-dev/breadboard-io repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Breadboard io design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which everyday-dev chose for the repository.
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979