Breakout 112pin Connector
About the Breakout 112pin Connector
Breakout 112pin Connector is an open source PCB design by rusefi, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 174 × 58 mm, with 39 components from 11 distinct parts.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
rusefi - GPL internal combustion engine control unit
See Connectors wiki page todo: move Connectors wiki page content into git
35 pin Mazda TCU 38 pin Chrysler NGC connector 48 pin Mazda Miata NA6 52 pin Mitsubishi Galant VR4 55 pin TE Lada 55 pin Motronic 1.5.x BMW/GM 60 pin Ford EEC-IV 64 pin Mazda Miata NA NB1, Honda Civic 68 pin Volkswagen Audi VAG 72 pin Mazda Miata NB2 88 pin Volkswagen Audi VAG 121 pin Volkswagen Audi VAG 134 pin BWM 154 pin Volkswagen Audi VAG
Breakout 112pin Connector bill of materials (BOM)
39 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0643330100 | 64333-0100_1 | J1 |
| 8 | Conn_01x04 | Pin_Header_Straight_1x04_Pitch2.54mm | J2, J8, J9, J21, J28, J29, J34, J35 |
| 1 | CONN_02X08 Conn_01x04 | Pin_Header_Straight_1x04_Pitch2.54mm | J3 |
| 1 | CONN_02X08 Conn_01x06 | Pin_Header_Straight_1x06_Pitch2.54mm | J4 |
| 3 | CONN_01X03 Conn_01x06 | Pin_Header_Straight_1x06_Pitch2.54mm | J5, J6, J7 |
| 12 | Conn_01x06 | Pin_Header_Straight_1x06_Pitch2.54mm | J10, J11, J12, J13, J16, J17, J18, J19 +4 |
| 1 | CONN_01X03 Conn_01x04 | Pin_Header_Straight_1x04_Pitch2.54mm | J14 |
| 1 | CONN_01X01 Conn_01x04 | Pin_Header_Straight_1x04_Pitch2.54mm | J15 |
| 1 | CONN_01X02 Conn_01x04 | Pin_Header_Straight_1x04_Pitch2.54mm | J20 |
| 2 | Conn_01x01 | Pin_Header_Straight_1x01_Pitch2.54mm | J26, J27 |
| 8 | Conn_01x10 | Pin_Header_Straight_1x10_Pitch2.54mm | J30, J31, J32, J33, J36, J37, J38, J39 |
Breakout 112pin Connector design files
The KiCad project lives in the rusefi/rusefi repository on GitHub; these links point at the commit this page was built from.
Breakout 112pin Connector: common questions
How big is the Breakout 112pin Connector?
The Breakout 112pin Connector measures 174 × 58 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Breakout 112pin Connector?
39 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Breakout 112pin Connector design files?
From the rusefi/rusefi repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Breakout 112pin Connector design in my own project?
Yes, under the terms of its GPL-3.0 license, which rusefi chose for the repository.
More boards in rusefi
Common Rail MC33816 board
101.6 × 119.6 mm183 parts2LGPL-3.01.2k
Common Rail PT2000 board
61 × 136.5 mm168 parts2LGPL-3.01.2k
Stimulator
101.6 × 32.4 mm150 parts2LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
STM32176 pin board
61.8 × 73.2 mm76 parts2LGPL-3.01.2k
STM32Brain board STM32F407
61.8 × 73.2 mm69 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
VR board
38.1 × 12.7 mm37 parts2LGPL-3.01.2k
ECU adapter
137.2 × 41.5 mm25 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Similar boards
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979
Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Hat
65 × 56 mm81 parts2LNo license675
L0 stepper driver
Luos-io
20.3 × 15.2 mm18 parts2LMIT547
L0 Dynamixel
20.3 × 15.2 mm15 parts2LMIT547