QA403-Impedance-Fixture

excitonlabs·QA403-Impedance-Fixture

QA403-Impedance-Fixture PCB layout, top view — open source board by excitonlabs

About the QA403-Impedance-Fixture PCB

QA403-Impedance-Fixture is an open source PCB design by excitonlabs, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 74.5 × 44 mm, with 10 components from 6 distinct parts.

By type, the board carries 6 connectors and 4 resistors.

It belongs with the test & measurement designs in this gallery.

From the project

A test fixture for the QuantAsylum QA403 for measuring impedance

A test fixture for the QuantAsylum QA403 for measuring impedance based on Matt's blog posts: https://quantasylum.com/blogs/news/speaker-impedance-measurements https://quantasylum.com/blogs/news/measuring-input-impedance

The PCB is fairly flexible, there are three footprints for SMD currents sense resistors and a single through-hole footprint. These are in parallel so the expectation is you place one and write the value on the silk screen space provided. The PCB also had an additional BNC for the L- input which may be useful in push-pull differential measurements.

QA403-Impedance-Fixture, from the project README
From the project README

QA403-Impedance-Fixture bill of materials (BOM)

10 components, 6 distinct parts.

QtyPartRefs
2
NMJ6HCD2_WITH_SCREW_TERM
J1, J2
4
Conn_Coaxial
J3, J4, J5, J6
1
DNP
R1
1
DNP
R2
1
DNP
R3
1
DNP
R4

QA403-Impedance-Fixture design files

The KiCad project lives in the excitonlabs/QA403-Impedance-Fixture repository on GitHub; these links point at the commit this page was built from.

QA403-Impedance-Fixture: common questions

How big is the QA403-Impedance-Fixture PCB?

The QA403-Impedance-Fixture measures 74.5 × 44 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the QA403-Impedance-Fixture?

10 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the QA403-Impedance-Fixture design files?

From the excitonlabs/QA403-Impedance-Fixture repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the QA403-Impedance-Fixture design in my own project?

Yes, under the terms of its CC0-1.0 license, which excitonlabs chose for the repository.

Similar boards