QRM Eliminator
f5vmr·QRM_Eliminator·New-QRM-Elim Dip-Trace Files/Phase-xVer5.0.kicad_pcb
About the QRM Eliminator PCB
QRM Eliminator is an open source PCB design by f5vmr, published on GitHub. It is a 2-layer board measuring 101.6 × 71.1 mm, with 65 components from 39 distinct parts.
Other key parts include the NE555P. By type, the board carries 16 resistors, 15 capacitors, 8 diodes, 7 connectors, 6 transistors and 4 inductors.
From the project
A mistake in the downloaded zip file!! The PCB is not designed with Diptrace but with KiCad and the version it was made with can be down loaded free from here - https://www.filehorse.com/download-kicad/55035/download/#google_vignette
Main components on the QRM Eliminator
QRM Eliminator bill of materials (BOM)
65 components, 39 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555P | DIP8 | U1 |
| 3 | J310 | TO-92_Wide | Q1, Q2, Q4 |
| 3 | PN2222A | TO-92_Wide | Q3, Q5, Q6 |
| 1 | Aux Ant High Imp | Connector | J1 |
| 1 | Aux Ant Low Imp | Connector-5mm-pin-spacing | J2 |
| 1 | TXRX | Connector-5mm-pin-spacing | J3 |
| 1 | Main TX Ant | Connector-5mm-pin-spacing | J4 |
| 1 | 12Volts | 2Pin_Molexwidespace | J6 |
| 1 | TXRX-LED | 2Pin_Molex-smallpin | J7 |
| 1 | PTT | SingleConnector | J8 |
| 1 | TXRX-RF | Relay_DPDT_Omron_G2RL | K1 |
| 1 | Protection | Relay_DPDT_Omron | K2 |
| 2 | 5K | Potentiometer_T-16H_Single_Horizontal | RV1, RV2 |
| 1 | 5K LOG | Potentiometer_T-16H_Single_Horizontal | RV3 |
| 1 | 50K | Preset | RV4 |
| 1 | Phase | SW_Push_DPDT-P0.1mil | SW1 |
| 1 | Pwr | SW_Push_DPDT-P0.1mil | SW2 |
| 6 | 1N4148 | Signal_Diode | D1, D2, D3, D4, D33, D34 |
| 2 | 1N60 | Signal_Diode1N60 | D31, D32 |
| 3 | 1mH | Inductor | L1, L2, L3 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BN73-202 | BN73-202 | L4 |
| 9 | 10n | CeramicDisc_P5.0mm | C2, C4, C5, C21, C22, C23, C33, C35 +1 |
| 1 | 4.7u | Small_Tant_Elect | C10 |
| 1 | 150p | CeramicDisc_P7.5_3pin | C24 |
| 1 | 3.3p | CeramicDisc_P4.0mm | C31 |
| 2 | 1n | CeramicDisc_P5.0mm | C32, C34 |
| 1 | 47u | Small_Tant_Elect-3pin | C36 |
| 1 | 100R | R_L6.3mm__P10.16mm_Pad2.2mm | R1 |
| 2 | 18R | R_L6.3mm__P10.16mm_Pad2.2mm | R2, R3 |
| 1 | 120R | R_L6.3mm__P10.16mm_Pad2.2mm | R5 |
| 1 | 3.3K | R_L6.3mm__P10.16mm_Pad2.2mm | R21 |
| 1 | 1.2K | R_L6.3mm__P10.16mm_Pad2.2mm | R22 |
| 1 | 1M | R_L6.3mm__P10.16mm_Pad2.2mm | R23 |
| 2 | 47R | R_L6.3mm__P10.16mm_Pad2.2mm | R24, R25 |
| 1 | 100K | R_L6.3mm__P10.16mm_Pad2.2mm | R31 |
| 2 | 10K | R_L6.3mm__P10.16mm_Pad2.2mm | R32, R35 |
| 1 | 5.1K | R_L6.3mm__P10.16mm_Pad2.2mm | R33 |
| 1 | 4.7K | R_L6.3mm__P10.16mm_Pad2.2mm | R34 |
| 2 | 560R | R_L6.3mm__P10.16mm_Pad2.2mm | R36, R37 |
QRM Eliminator design files
The KiCad project lives in the f5vmr/QRM_Eliminator repository on GitHub; these links point at the commit this page was built from.
QRM Eliminator: common questions
How big is the QRM Eliminator PCB?
The QRM Eliminator measures 101.6 × 71.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the QRM Eliminator?
65 components, from 39 distinct parts. The full bill of materials is listed on this page.
Where can I download the QRM Eliminator design files?
From the f5vmr/QRM_Eliminator repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the QRM Eliminator design in my own project?
The repository has no license, so all rights stay with f5vmr. Use it as a reference, and ask the author before reusing the design.