Hiside switch
fabianmink·MarbleAccelerator·electronics/hiside_switch/hiside_switch.kicad_pcb
About the Hiside switch PCB
Hiside switch is an open source PCB design by fabianmink, published on GitHub under the BSD-2-Clause license. It is a 2-layer board measuring 75 × 50 mm, with 21 components from 11 distinct parts.
Other key parts include the BTS6163D. By type, the board carries 8 resistors, 6 capacitors, 3 connectors, 1 IC, 1 transistor and 1 diode.
From the project
An accelerator / coilgun for metallic marbles
Coil winding cross sections are 15mm (coil length) x 7mm (inner radius 8mm, outer radius 15mm), leading to around 350 turns for 0.5mm wire diameter which results in an inductance of approximately 1mH.
Horizontal CAD design (base and tube parts)
The design is intended to be used with EVERLIGHT ITR9904 optical sensor for marble detection.
Vertical CAD design (base part and output)

Main components on the Hiside switch
Hiside switch bill of materials (BOM)
21 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BTS6163D | TO-252-4 | U1 |
| 1 | BC848 | SOT-23 | Q1 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2, J3 |
| 1 | Thermistor_PTC | RV_Disc_D9mm_W3.3mm_P5mm | TH1 |
| 1 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 2 | C | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C6 |
| 3 | C_Polarized | CP_Radial_D26.0mm_P10.00mm_SnapIn | C2, C3, C4 |
| 1 | C | C_Rect_L7.2mm_W4.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C5 |
| 6 | R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R6, R7, R8 |
| 2 | R | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R4, R5 |
Hiside switch design files
The KiCad project lives in the fabianmink/MarbleAccelerator repository on GitHub; these links point at the commit this page was built from.
Hiside switch: common questions
How big is the Hiside switch PCB?
The Hiside switch measures 75 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hiside switch?
21 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hiside switch design files?
From the fabianmink/MarbleAccelerator repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Hiside switch design in my own project?
Yes, under the terms of its BSD-2-Clause license, which fabianmink chose for the repository.