HagiwoBuffMult

fablabnk·HagiwoBuffMult

HagiwoBuffMult PCB layout, top view — open source board by fablabnk

About the HagiwoBuffMult PCB

HagiwoBuffMult is an open source PCB design by fablabnk, published on GitHub. It is a 2-layer board measuring 9.8 × 108.3 mm, with 45 components from 17 distinct parts.

Other key parts include the TL074. By type, the board carries 29 connectors, 8 resistors, 6 capacitors and 2 ICs.

From the project

A 2HP THT version of Hagiwo's Buffered Multiple that can operate in 2x3 or 1x6 modes

https://note.com/solder_state/n/n54e016f19c94#8e5c9ae0-af24-4910-aa9b-f91eed0dcada

- choosing to ignore issue that pads are too close to board edge by 0.03mm - In future revision could add two 100n decoupling caps such as in this design. Tried to add later on but it was too tight a squeeze.

Main components on the HagiwoBuffMult

HagiwoBuffMult bill of materials (BOM)

45 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
TL074
U1, U2
1
WQP-WQP518MA
IN1
Wenzhou QingPu Electronics Co
J1
1
WQP-WQP518MA
IN2
Wenzhou QingPu Electronics Co
J2
1
1-1002FBV0T
Eurorack_Power_10pin_Unshrouded
TAD
J3
1
WQP-WQP518MA
OUT1
Wenzhou QingPu Electronics Co
J4
1
WQP-WQP518MA
OUT2
Wenzhou QingPu Electronics Co
J5
1
WQP-WQP518MA
OUT3
Wenzhou QingPu Electronics Co
J6
1
WQP-WQP518MA
OUT4
Wenzhou QingPu Electronics Co
J7
1
WQP-WQP518MA
OUT5
Wenzhou QingPu Electronics Co
J8
1
WQP-WQP518MA
OUT6
Wenzhou QingPu Electronics Co
J9
7
CONN_01X01_PIN
Conn_01x01_Socket
J10, J11, J12, J13, J14, J15, J16
3
CONN_01X01_SOCKET
Conn_01x01_Socket
J17, J18, J19
7
CONN_01X01_SOCKET
Conn_01x01_Pin
J20, J21, J22, J23, J24, J25, J26
3
Conn_01x01_Pin
J27, J28, J29
2
100N
10uF
C1, C2
4
100nF
C3, C4, C5, C6
8
330
R1, R2, R3, R4, R5, R6, R7, R8

HagiwoBuffMult design files

The KiCad project lives in the fablabnk/HagiwoBuffMult repository on GitHub; these links point at the commit this page was built from.

HagiwoBuffMult: common questions

How big is the HagiwoBuffMult PCB?

The HagiwoBuffMult measures 9.8 × 108.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HagiwoBuffMult?

45 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the HagiwoBuffMult design files?

From the fablabnk/HagiwoBuffMult repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the HagiwoBuffMult design in my own project?

The repository has no license, so all rights stay with fablabnk. Use it as a reference, and ask the author before reusing the design.