40-Keyboard with-STM32-Bluepill
fallingdowncat·40-Keyboard-with-STM32-Bluepill
About the 40-Keyboard with-STM32-Bluepill PCB
40-Keyboard with-STM32-Bluepill is an open source STM32 PCB design by fallingdowncat, published on GitHub under the MIT license. It is a 2-layer board measuring 228.6 × 84.2 mm, with 106 components from 21 distinct parts.
Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the MCP1700x-330xxTT. By type, the board carries 40 switches, 40 diodes, 12 capacitors, 6 resistors, 2 ICs and 2 connectors.
It belongs with the keyboards designs in this gallery.
From the project
Smallest keyboard format possible with cheap STM32F103C8T6 microcontroller
Main components on the 40-Keyboard with-STM32-Bluepill
40-Keyboard with-STM32-Bluepill bill of materials (BOM)
106 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1700x-330xxTT | SOT-23 | U1 |
| 1 | STM32F103C8T6 STMicroelectronics | LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | ABM3-8.000MHZ | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | USBLC6-2SC6Y | SOT95P280X145-6N | DD2 |
| 1 | DSK26 | D_SOD-123FL | DD24 |
| 32 | SW_Push | SW_Hotswap_Kailh_MX_1.00u | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +24 |
| 5 | SW_Push | SW_Hotswap_Kailh_MX_1.25u | SW13, SW33, SW35, SW39, SW40 |
| 2 | SW_Push | SW_Hotswap_Kailh_MX_1.75u | SW23, SW24 |
| 1 | SW_Push | SW_Hotswap_Kailh_MX_6.25u | SW38 |
| 1 | SW_Push | SW_TS-1088-AR02016 | SWW1 |
| 40 | D | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +32 |
| 3 | 1u | C_0805 | C1, C2, C6 |
| 2 | 27p | C_0805 | C3, C4 |
| 1 | 10u | C_0805 | C5 |
| 3 | 4.7u | C_0805 | C7, C10, C13 |
| 3 | 100n | C_0805 | C8, C9, C11 |
| 2 | 100k | R_0805 | R2, R7 |
| 2 | 5.1k | R_0805 | R3, R4 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 22 | R_0805 | R5, R6 |
40-Keyboard with-STM32-Bluepill design files
The KiCad project lives in the fallingdowncat/40-Keyboard-with-STM32-Bluepill repository on GitHub; these links point at the commit this page was built from.
- LayoutBluepill 40P Keyboard.kicad_pcb
- SchematicBluepill 40P Keyboard.kicad_sch
- BOMREADME.md
40-Keyboard with-STM32-Bluepill: common questions
What microcontroller does the 40-Keyboard with-STM32-Bluepill use?
The 40-Keyboard with-STM32-Bluepill is built around the STM32F103C8T6, from the STM32 family.
How big is the 40-Keyboard with-STM32-Bluepill PCB?
The 40-Keyboard with-STM32-Bluepill measures 228.6 × 84.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 40-Keyboard with-STM32-Bluepill?
106 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 40-Keyboard with-STM32-Bluepill design files?
From the fallingdowncat/40-Keyboard-with-STM32-Bluepill repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 40-Keyboard with-STM32-Bluepill design in my own project?
Yes, under the terms of its MIT license, which fallingdowncat chose for the repository.
Can I test firmware for the 40-Keyboard with-STM32-Bluepill without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k