A2C DVI Board
About the A2C DVI Board
A2C DVI Board is an open source PCB design by FarLeftLane, published on GitHub under the MIT license. It is a 2-layer board measuring 31.5 × 79.5 mm, with 13 components from 9 distinct parts.
Other key parts include the LM7805_TO220 and LM393. By type, the board carries 6 resistors, 3 capacitors, 2 ICs, 1 connector and 1 switch.
From the project
Apple IIc adapter to use a A2DVI card for dvi/hdmi output
Main components on the A2C DVI Board
A2C DVI Board bill of materials (BOM)
13 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM7805_TO220 | TO-220-3_Vertical | U1 |
| 1 | LM393 | DIP-8_W7.62mm | U2 |
| 1 | A2E_Slot | A2E_50pin_card_edge_female | J2 |
| 1 | Config | PinSocket_1x03_P2.54mm_Vertical | SW1 |
| 1 | 0.33uf | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1 |
| 2 | 0.1uf | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C3 |
| 2 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R6 |
| 3 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R5 |
| 1 | 22K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
A2C DVI Board design files
The KiCad project lives in the FarLeftLane/A2C_DVI_Board repository on GitHub; these links point at the commit this page was built from.
A2C DVI Board: common questions
How big is the A2C DVI Board?
The A2C DVI Board measures 31.5 × 79.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the A2C DVI Board?
13 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the A2C DVI Board design files?
From the FarLeftLane/A2C_DVI_Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the A2C DVI Board design in my own project?
Yes, under the terms of its MIT license, which FarLeftLane chose for the repository.