Joy-Board
FazalThe·Joy-Board·PCB/Joy Board.kicad_pcb
About the Joy-Board
Joy-Board is an open source PCB design by FazalThe, published on GitHub. It is a 2-layer board measuring 282.7 × 138.1 mm, with 123 components from 12 distinct parts.
Other key parts include the COM-09032. By type, the board carries 20 switches, 20 diodes, 16 resistors, 2 battery holders and 1 IC.
It belongs with the keyboards designs in this gallery.
From the project
A custom-built split keyboard with a built in thumb joystick on the left side, runs on zmk firmware and also supports zmk studio. The joystick is inteded to use the movements as key presses, but later is when I realised that it's really good for gaming( I don't really game, maybe
A custom-built split keyboard with a built in thumb joystick on the left side, runs on zmk firmware and also supports zmk studio. The joystick is inteded to use the movements as key presses, but later is when I realised that it's really good for gaming( I don't really game, maybe thats why).
- Split Ergonomic Layout - Thumb Joystick (Left Side) - ZMK Studio
- Cherry MX keycap 3D model from GrabCAD.

Main components on the Joy-Board
Joy-Board bill of materials (BOM)
123 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | COM-09032 | XDCR_COM-09032 | U3 |
| 2 | Conn_01x02_Pin | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | BT1, BT2 |
| 4 | LM339 | SOIC-14_3.9x8.7mm_P1.27mm | O_DOWN1, O_Left1, O_RIGHT1, O_UP1 |
| 20 | SW_Push | SW_Cherry_MX_1.00u_PCB_3d | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +12 |
| 30 | D | D_SOD-123 | rD1, rD2, rD3, rD4, rD5, rD6, rD7, rD8 +22 |
| 29 | SW_Push | SW_Cherry_MX_1.00u_PCB_3d | rSW1, rSW2, rSW3, rSW4, rSW5, rSW6, rSW7, rSW8 +21 |
| 1 | SW_Push | SW_Cherry_MX_1.50u_PCB | rSW30 |
| 20 | D | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +12 |
| 4 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 4 | 200 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R8 |
| 4 | 2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R11, R14, R16 |
| 4 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R12, R13, R15 |
Joy-Board design files
The KiCad project lives in the FazalThe/Joy-Board repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Joy Board.kicad_pcb
- SchematicPCB/Joy Board.kicad_sch
- BOMBOM.csv
Joy-Board: common questions
How big is the Joy-Board?
The Joy-Board measures 282.7 × 138.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Joy-Board?
123 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Joy-Board design files?
From the FazalThe/Joy-Board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Joy-Board design in my own project?
The repository has no license, so all rights stay with FazalThe. Use it as a reference, and ask the author before reusing the design.