34 open source boards using the COM-09032
Real designs built with the COM-09032, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
LMN-3-ECAD
FundamentalFrequency
304.8 × 95.3 mm100 parts2LCC-BY-SA-4.0106Raspberry Pi
Left
Hex-4
127.8 × 107 mm49 parts2LMIT11ESP32
Esp gamepad v2
Reiko0908
188.5 × 88.9 mm66 parts2LApache-2.02ESP32
Long range remote lora nrf wifi bluetooth
rmingon
100 × 100 mm42 parts2LCERN-OHL-S-2.02ESP32
Esp32-ble mouse remote
kayaked
50 × 200 mm26 parts2LMIT2PCBRev2
MilesMayhew
213.4 × 128.3 mm63 parts2LNo license1AVR/Arduino
Rolltech
kajgm
100 × 49 mm11 parts2LNo license1Nordic nRF
Custom keyboard
aidancahill
299 × 151.4 mm123 parts2LMIT0Joy-Board
FazalThe
282.7 × 138.1 mm123 parts2LNo license0AVR/Arduino
Stno
Heinrich-XIAO
143.2 × 113.5 mm78 parts2LNo license0Dialpad
parzival43
100 × 100 mm75 parts2LNo license0ESP32
Bonk
tyke01
125 × 100 mm72 parts4LNo license0ESP32
Macropad v2
Anycircle11139s
171.7 × 103.2 mm70 parts2LNo license0STM32
Handheld-Game
StevenKourani
195.2 × 60.8 mm69 parts2LMIT0ESP32
Dipado
dipa-cotton
193.4 × 87.2 mm45 parts2LNo license0AVR/Arduino
Game pad-
MohamedHassanExp
108.6 × 46 mm20 parts2LMIT0ESP32
Game controller thing
Anycircle11139s
92.6 × 73.3 mm19 parts2LNo license0Raspberry Pi
Controller
KrishP08
128 × 64.5 mm14 parts2LNo license0AVR/Arduino
Universal-RF-Controller
RyanWillie
124 × 64 mm12 parts2LCC0-1.00AVR/Arduino
6-channel nrf24l01-transmitter
Aritra607
124.3 × 39.5 mm11 parts2LNo license0AVR/Arduino
Tranceiver 101
rubaiyat666
106.5 × 72.5 mm11 parts2LNo license0ESP32
Controller
RayaneGuebre
172 × 100.2 mm7 parts2LNo license0Raspberry Pi
Right
Hex-4
130 × 109 mm49 parts2LMIT11Capstone
MilesMayhew
232.4 × 172.7 mm55 parts2LNo license1DroidVR
xxdamlaxx
30 × 100 mm44 parts2LMIT1ESP32
SwervecontrollerPCBv1
NIKOLAI-GOGOL444
112 × 53.9 mm65 parts4LApache-2.00ESP32
Modules
Koalaven
34 × 41 mm48 parts2LNo license0LHS Joystick
dmcke5
2 × 2 mm3 parts2LCERN-OHL-S-2.0131Fidget
chinesejacklee
140 × 105 mm14 parts2LNo license0RHS Joystick
dmcke5
2 × 2 mm3 parts2LCERN-OHL-S-2.0131Joystick
KOEGlike
25.5 × 32 mm4 parts2LGPL-3.06Joystick
hackclub
25.5 × 32 mm4 parts2LGPL-3.05RP2040/RP2350
Controller V1
danielwilczak101
142.9 × 87.6 mm14 parts2LNo license0OSMC Module Joystick V2
Koalaven
34 × 41 mm5 parts4LNo license0
How designs wire the COM-09032
Read from the KiCad layouts of 30 open source designs, one per repository: what each pin of the COM-09032 connects to, and the resistors, capacitors and other passives placed on it.
- The V- pin is tied to GND on 28 of 30 designs.
- Pin B2B is left unconnected on 27 of 28 designs.
- The H- pin is tied to GND on 27 of 30 designs (not connected on 2).
- Pin B1B is left unconnected on 26 of 28 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin B1B | Connected to: Not connected 93% | — |
| SEL-pin B2A | Connected to: GND 79% | — |
| Pin B2B | Connected to: Not connected 96% | — |
| H+pin H1 | Connected to: 3.3V 87% | — |
| H-pin H3 | Connected to: GND 90% | — |
| SHIELDpin S1, S2, S3, S4 | Connected to: GND 61% · not connected 36% | — |
| V+pin V1 | Connected to: 3.3V 90% | — |
| V-pin V3 | Connected to: GND 93% | — |
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LHS Joystick PCB by dmcke5, LMN-3-ECAD by FundamentalFrequency, Left by Hex-4 and Joystick by KOEGlike.
The COM-09032 in open source designs
The gallery holds 34 open source boards using the COM-09032 from 30 GitHub repositories; a typical one measures about 124.7 × 88.3 mm and carries around 43 components.
91% are two-layer designs, the rest use four layers or more, and 47% carry an open source license.
The most starred is RHS Joystick PCB by dmcke5.
Parts used alongside the COM-09032
Microcontrollers on boards using the COM-09032
What boards using the COM-09032 are built for
COM-09032: common questions
Where can I find a COM-09032 reference design?
Each of the 34 boards on this page is a real design using the COM-09032. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the COM-09032 V- pin connected?
The V- pin is tied to GND on 28 of 30 designs. Counted from the KiCad layouts of 30 open source designs using the COM-09032.
How is the COM-09032 pin B2B connected?
Pin B2B is left unconnected on 27 of 28 designs. Counted from the KiCad layouts of 30 open source designs using the COM-09032.
How is the COM-09032 H- pin connected?
The H- pin is tied to GND on 27 of 30 designs (not connected on 2). Counted from the KiCad layouts of 30 open source designs using the COM-09032.
What parts are used alongside the COM-09032?
The NRF24L01_Breakout, ADS1115IDGS, XIAO-ESP32-S3-DIP, Arduino_Nano_ESP32 and Arduino_Nano_v3.x appear in the most repositories here.
Which microcontrollers do boards using the COM-09032 use?
Most are built on ESP32 (10), AVR/Arduino (6), Raspberry Pi (3) and STM32 (1).
How big is a typical board using the COM-09032?
The median is 124.7 × 88.3 mm, and 91% are two-layer designs.
What is the most popular open source board using the COM-09032?
By GitHub stars, RHS Joystick PCB by dmcke5, with 131 stars.
Can I simulate one of these boards using the COM-09032 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.