Carga activa
About the Carga activa PCB
Carga activa is an open source PCB design by fberni21, published on GitHub. It is a 2-layer board measuring 73.5 × 40.3 mm, with 33 components from 20 distinct parts.
Other key parts include the TL431LP. By type, the board carries 13 resistors, 9 transistors, 4 connectors, 4 test points, 1 IC and 1 capacitor.
From the project
FIUBA - Electrónica - Taller de Diseño de Circuitos Electrónicos
Desarrollo e informes del trabajo grupal de la materia Taller de Diseño de Circuitos Electrónicos.
Main components on the Carga activa
Carga activa bill of materials (BOM)
33 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL431LP | Custom_TO-92_Wide | U1 |
| 4 | BC547 | Custom_TO-92_Wide | Q1, Q2, Q4, Q6 |
| 4 | BC557 | Custom_TO-92_Wide | Q3, Q5, Q8, Q9 |
| 1 | IRFZ46 | TO-220-3_Vertical | Q7 |
| 2 | SCREW_TERMINAL_01X02 Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1, J2 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | 2k | Potentiometer_Alps_RK163_Single_Horizontal | RV1 |
| 4 | TestPoint | Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork | TP1, TP2, TP3, TP6 |
| 1 | 100n | C_Disc_D3.4mm_W2.1mm_P2.50mm | C1 |
| 2 | 2k | Custom _pads_R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3 |
| 2 | 1k | Custom _pads_R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4 |
| 2 | 100 | Custom _pads_R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R7 |
| 1 | 470 | Custom _pads_R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | 680 1 | R_Axial_DIN0614_L14.3mm_D5.7mm_P15.24mm_Horizontal | R8 |
| 1 | 5K6 5k6 | Custom _pads_R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10 |
| 1 | 1 | R_Axial_DIN0614_L14.3mm_D5.7mm_P15.24mm_Horizontal | R11 |
| 1 | 6K2 6k2 | Custom _pads_R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12 |
| 1 | DNP | Custom _pads_R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R14 |
| 1 | 1M | Custom _pads_R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R15 |
Carga activa design files
The KiCad project lives in the fberni21/taller-circuitos repository on GitHub; these links point at the commit this page was built from.
Carga activa: common questions
How big is the Carga activa PCB?
The Carga activa measures 73.5 × 40.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Carga activa?
33 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Carga activa design files?
From the fberni21/taller-circuitos repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Carga activa design in my own project?
The repository has no license, so all rights stay with fberni21. Use it as a reference, and ask the author before reusing the design.
