HardLabs

Slice PRTO THT S2L

feastorg·Slice_PRTO_THT_S2L·hardware/BREAD_Slice.kicad_pcb

Slice PRTO THT S2L PCB layout, top view — open source AVR/Arduino board by feastorg

About the Slice PRTO THT S2L PCB

Slice PRTO THT S2L is an open source AVR/Arduino PCB design by feastorg, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 70 × 100 mm, with 17 components from 12 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. By type, the board carries 8 connectors, 4 capacitors, 1 IC, 1 module, 1 diode and 1 inductor.

From the project

Prototyping Slice for Rapidly Creating BREAD Devices.

BREAD slice for creating new BREAD slices.

[Explain how to use the project. Include examples and screenshots if applicable.]

Main components on the Slice PRTO THT S2L

Arduino_Nano_v3.x

Slice PRTO THT S2L bill of materials (BOM)

17 components, 12 distinct parts.

QtyPartRefs
1
~
U1
1
Arduino_Nano_v3.x
A1
1
Conn_01x10_Socket
J1
3
Conn_01x03_Pin
J2, J7, J8
2
Conn_01x02_Pin
J3, J4
1
Conn_01x05_Pin
J5
1
Conn_01x06_Pin
J6
1
Heatsink_Pad
HS1
1
WS2812B_5050
D1
1
4.7uH
L1
3
22uF
C1, C3, C4
1
100nF
C2

Slice PRTO THT S2L design files

The KiCad project lives in the feastorg/Slice_PRTO_THT_S2L repository on GitHub; these links point at the commit this page was built from.

Slice PRTO THT S2L: common questions

What microcontroller does the Slice PRTO THT S2L use?

The Slice PRTO THT S2L is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the Slice PRTO THT S2L PCB?

The Slice PRTO THT S2L measures 70 × 100 mm, has 2 copper layers and is 1.67 mm thick.

How many components are on the Slice PRTO THT S2L?

17 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the Slice PRTO THT S2L design files?

From the feastorg/Slice_PRTO_THT_S2L repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Slice PRTO THT S2L design in my own project?

Yes, under the terms of its GPL-3.0 license, which feastorg chose for the repository.

Can I test firmware for the Slice PRTO THT S2L without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards