PCB Aquarium2

FernandesVincent·2425_Maker_Aquarium·hardware/PCB_Aquarium2/PCB_Aquarium2.kicad_pcb

PCB Aquarium2 layout, top view — open source STM32 board by FernandesVincent

About the PCB Aquarium2

PCB Aquarium2 is an open source STM32 PCB design by FernandesVincent, published on GitHub. It is a 4-layer board measuring 71 × 61 mm, with 100 components from 26 distinct parts.

Its main chip is the STM32G474RETX, from the STM32 family. Other key parts include the 173010578 and AZ1117CH2-3.3TRG1. By type, the board carries 44 capacitors, 38 connectors, 7 resistors, 3 ICs, 3 diodes and 2 transistors.

From the project

SOMMAIRE - Préambule - Objectifs du projet - Meuble - Filtration - Test en gouttes - Raspberry Pi - PCB - Écrans - Code - Câblage - Résultat et Conclusion - Futur du projet Préambule Aujourd'hui, lorsqu'un particulier achète son aquarium il doit pouvoir gérer un nombre important

SOMMAIRE - Préambule - Objectifs du projet - Meuble - Filtration - Test en gouttes - Raspberry Pi - PCB - Écrans - Code - Câblage - Résultat et Conclusion - Futur du projet Préambule Aujourd'hui, lorsqu'un particulier achète son aquarium il doit pouvoir gérer un nombre important de facteurs comme la température du bac, la distribution de la nourriture mais également les différents test que peux nécessité son Aquarium (ph, NO2, CO2, etc...). C'est donc dans l'idée de soulager les personnes que cela pèse de devoir s'occuper de tout ça que l'idée du projet d'aquarium automatisé et connecté m'est…

PCB Aquarium2, from the project README
From the project README

Main components on the PCB Aquarium2

PCB Aquarium2 bill of materials (BOM)

100 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32G474RETX
STM32G474RETx
U1
1
173010578
U2
1
AZ1117CH2-3.3TRG1
AZ1117-3.3
U3
2
SQ2310ES
NMOS
Q1, Q2
23
CONN_01X03
Conn_01x03
J1, J8, J9, J10, J11, J12, J13, J14 +15
3
CONN_01X06
Conn_01x06
J2, J6, J7
8
CONN_01X02
Conn_01x02
J3, J4, J5, J20, J21, J22, J23, J32
1
CONN_01X02
Conn_01x02
J33
1
CONN_01X04
Conn_01x04
J34
1
STLINK-V3MINIE
Conn_ST_STDC14
J35
1
CONN_01X04
Conn_01x04
J38
1
SW_SPST
SW1
1
472123010111
SW_SPDT
SW2
3
150060RS55040
RED_LED
D1, D2, D3
1
39N
39n
L1
1
4U7
4u7
C1
6
100N
100n
C2, C3, C4, C6, C7, C8
34
1u
C5, C10, C11, C12, C13, C14, C15, C16 +26
1
10N
10n
C9
1
10U
10u
C38
Show 6 more
QtyPartRefs
1
22U
22u
C39
2
1k
R1, R3
2
10K
10k
R2, R4
1
5K1
5k1
R5
1
1K6
1k6
R6
1
820
R7

PCB Aquarium2 design files

The KiCad project lives in the FernandesVincent/2425_Maker_Aquarium repository on GitHub; these links point at the commit this page was built from.

PCB Aquarium2: common questions

What microcontroller does the PCB Aquarium2 use?

The PCB Aquarium2 is built around the STM32G474RETX, from the STM32 family.

How big is the PCB Aquarium2?

The PCB Aquarium2 measures 71 × 61 mm, has 4 copper layers and is 1.599978 mm thick.

How many components are on the PCB Aquarium2?

100 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PCB Aquarium2 design files?

From the FernandesVincent/2425_Maker_Aquarium repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the PCB Aquarium2 design in my own project?

The repository has no license, so all rights stay with FernandesVincent. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PCB Aquarium2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in 2425_Maker_Aquarium

Similar boards