HardLabs

FiberCircuits - MCU & sensing fiber

FiberCircuits·hardware·imu_fiber/kicad_files/imu_fiber.kicad_pcb

FiberCircuits - MCU & sensing fiber PCB layout, top view — open source STM32 board by FiberCircuits

About the FiberCircuits - MCU & sensing fiber PCB

FiberCircuits - MCU & sensing fiber is an open source STM32 PCB design by FiberCircuits, published on GitHub. It is a 2-layer board measuring 200 × 4.4 mm, with 18 components from 12 distinct parts.

Its main chip is the STM32C011D6Y6TR, from the STM32 family. Other key parts include the MMC5633NJL, MC3672 and PT2043A. By type, the board carries 7 capacitors, 5 ICs, 4 resistors, 1 connector and 1 diode.

It belongs with the sensors designs in this gallery.

From the project

Kicad and textile design files.

1) folders with Kicad) files (quick previews: imufiber / ledsfiber):

2) folders with embroidery and knitting design files:

Main components on the FiberCircuits - MCU & sensing fiber

STM32C011D6Y6TRMMC5633NJLMC3672PT2043A

FiberCircuits - MCU & sensing fiber bill of materials (BOM)

18 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32C011D6Y6TR
U1
1
MMC5633NJL
U2
2
MC3672
U3, U4
1
PT2043A
U5
1
header_1.27mm
J1
1
LED
D1
2
2.2 uF
C1, C2
4
0.1 uF
C3, C4, C5, C6
1
1 pF
C7
2
4.7 K
R1, R2
1
680 R
R3
1
2 K
R4

FiberCircuits - MCU & sensing fiber design files

The KiCad project lives in the FiberCircuits/hardware repository on GitHub; these links point at the commit this page was built from.

FiberCircuits - MCU & sensing fiber: common questions

What microcontroller does the FiberCircuits - MCU & sensing fiber use?

The FiberCircuits - MCU & sensing fiber is built around the STM32C011D6Y6TR, from the STM32 family.

How big is the FiberCircuits - MCU & sensing fiber PCB?

The FiberCircuits - MCU & sensing fiber measures 200 × 4.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the FiberCircuits - MCU & sensing fiber?

18 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the FiberCircuits - MCU & sensing fiber design files?

From the FiberCircuits/hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the FiberCircuits - MCU & sensing fiber design in my own project?

The repository has no license, so all rights stay with FiberCircuits. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the FiberCircuits - MCU & sensing fiber without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in hardware

Similar boards