I2C-Encoder-Keys
fietser28·I2C-Encoder-Keys·I2C-Encoder-Keys/I2C-Encoder-Keys.kicad_pcb
About the I2C-Encoder-Keys PCB
I2C-Encoder-Keys is an open source PCB design by fietser28, published on GitHub. It is a 2-layer board measuring 71.5 × 36.6 mm, with 35 components from 9 distinct parts.
Other key parts include the MCP23008-xSO. By type, the board carries 17 resistors, 9 capacitors, 4 switches, 3 connectors and 1 IC.
From the project
This is simple design to connect a rotary encoder with pushbutton and 4 switches to an MCU using I2C. The design uses the common MCP23008 chip. The BOM is kept simple with as many common parts as possible. The encoder and switches have a small RC network in place for basic deboun
This is simple design to connect a rotary encoder with pushbutton and 4 switches to an MCU using I2C. The design uses the common MCP23008 chip. The BOM is kept simple with as many common parts as possible. The encoder and switches have a small RC network in place for basic debouncing (you still need to handle this also in software).
The board breaks out 3V3 power input, GND, SCL, SDA, Interrupt and !Reset.

Main components on the I2C-Encoder-Keys
I2C-Encoder-Keys bill of materials (BOM)
35 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP23008-xSO | SOIC-18W_7.5x11.6mm_P1.27mm | U1 |
| 2 | JST-S6B-PH-SM4 | JST_PH_S6B-PH-SM4-TB_1x06-1MP_P2.00mm_Horizontal | J1, J2 |
| 1 | PH 1x6-2.54mm | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Bourns PEC11R | RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm | ENC1 |
| 4 | SW_SPST | SW_PUSH_6mm_H9.5mm | SW0, SW1, SW2, SW3 |
| 1 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 7 | 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4, C5, C6, C7, C8 |
| 1 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 17 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 +9 |
I2C-Encoder-Keys design files
The KiCad project lives in the fietser28/I2C-Encoder-Keys repository on GitHub; these links point at the commit this page was built from.
I2C-Encoder-Keys: common questions
How big is the I2C-Encoder-Keys PCB?
The I2C-Encoder-Keys measures 71.5 × 36.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the I2C-Encoder-Keys?
35 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the I2C-Encoder-Keys design files?
From the fietser28/I2C-Encoder-Keys repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the I2C-Encoder-Keys design in my own project?
The repository has no license, so all rights stay with fietser28. Use it as a reference, and ask the author before reusing the design.