16 open source boards using the MCP23008-xSO

Real designs built with the MCP23008-xSO, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the MCP23008-xSO

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the MCP23008-xSO connects to, and the resistors, capacitors and other passives placed on it.

  • The SCL pin has a pull-up to 3.3V on 9 of 13 designs, most often 4.7 kΩ (then 10 kΩ).
  • The SDA pin has a pull-up to 3.3V on 9 of 13 designs, most often 4.7 kΩ (then 10 kΩ).
  • The VDD pin has a decoupling capacitor on 8 of 13 designs, most often 100 nF (then 10 µF).
  • The A2 pin is tied to GND on 9 of 13 designs (a signal on 3).
SCLpin 1Connected to: A connector 69%, the microcontroller 31%
  • Pull-up to 3.3V on 69% · 4.7 kΩ (6), 10 kΩ (2), 5.1 kΩ (1)
SDApin 2Connected to: A connector 69%, the microcontroller 31%
  • Pull-up to 3.3V on 69% · 4.7 kΩ (6), 10 kΩ (2), 5.1 kΩ (1)
A2pin 3Connected to: GND 69% · a signal 23%
A1pin 4Connected to: GND 69% · a signal 23%
A0pin 5Connected to: GND 69% · a signal 23%
RESETpin 6Connected to: A connector 23% · 3.3V 31%
  • Pull-up to 3.3V on 38% · 10 kΩ (4), 100 kΩ (1)
NCpin 7Connected to: Not connected 100%
VSSpin 9Connected to: GND 92%
GP2pin 12Connected to: Signal 100%
  • Series resistor on 31% · 330 Ω (1), 47 Ω (1), 10 kΩ (1)
GP3pin 13Connected to: Signal 100%
  • Series resistor on 38% · 9.1 kΩ (1), 4.7 kΩ (1), 330 Ω (1)
GP4pin 14Connected to: Signal 77% · not connected 15%
  • Series resistor on 46% · 1 kΩ (2), 200 Ω (2), 9.1 kΩ (1)
GP5pin 15Connected to: Signal 69% · not connected 31%
  • Series resistor on 31% · 1 kΩ (2), 200 Ω (2)
GP6pin 16Connected to: A connector 23% · not connected 23%
  • Series resistor on 38% · 200 Ω (2), 1 kΩ (1), 56 Ω (1)
GP7pin 17Connected to: A connector 31% · not connected 23%
  • Series resistor on 38% · 200 Ω (2), 1 kΩ (1), 56 Ω (1)
VDDpin 18Connected to: 3.3V 100%
  • Decoupling capacitor on 62% · 100 nF (6), 10 µF (2)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Usbcounter by swharden, Security-Alarm-Panel by Matyas604, Soup Pad by souptik-samanta and Cbi by 0x007E.

The MCP23008-xSO in open source designs

The gallery holds 16 open source boards using the MCP23008-xSO from 13 GitHub repositories; a typical one measures about 88.9 × 84.2 mm and carries around 91 components.

80% are two-layer designs, the rest use four layers or more, and 19% carry an open source license.

The most starred is Usbcounter by swharden.

Parts used alongside the MCP23008-xSO

Microcontrollers on boards using the MCP23008-xSO

MCP23008-xSO: common questions

Where can I find a MCP23008-xSO reference design?

Each of the 16 boards on this page is a real design using the MCP23008-xSO. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the MCP23008-xSO SCL pin?

The SCL pin has a pull-up to 3.3V on 9 of 13 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 13 open source designs using the MCP23008-xSO.

What pull-up resistor is used on the MCP23008-xSO SDA pin?

The SDA pin has a pull-up to 3.3V on 9 of 13 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 13 open source designs using the MCP23008-xSO.

What decoupling capacitors do designs use on the MCP23008-xSO VDD pin?

The VDD pin has a decoupling capacitor on 8 of 13 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 13 open source designs using the MCP23008-xSO.

Which microcontrollers do boards using the MCP23008-xSO use?

Most are built on ESP32 (5), AVR/Arduino (2), ESP8266 (1) and RP2040/RP2350 (1).

How big is a typical board using the MCP23008-xSO?

The median is 88.9 × 84.2 mm, and 80% are two-layer designs.

What is the most popular open source board using the MCP23008-xSO?

By GitHub stars, Usbcounter by swharden, with 25 stars.

Can I simulate one of these boards using the MCP23008-xSO before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part