DaisyTape
FilippoGorini·DaisyTape·hardware/pcb/DaisyTape_v2_4_layers.kicad_pcb
About the DaisyTape PCB
DaisyTape is an open source PCB design by FilippoGorini, published on GitHub. It is a 4-layer board measuring 100.3 × 82.6 mm, with 133 components from 42 distinct parts.
Other key parts include the LME49721, R-78E5.0-1.0, CPC1018N, SN74AHCT1G125DBVR and 74HCT125D,653. By type, the board carries 49 capacitors, 33 resistors, 11 LEDs, 10 ICs, 7 connectors and 5 diodes.
Main components on the DaisyTape
DaisyTape bill of materials (BOM)
133 components, 42 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | LME49721 | SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U3 |
| 1 | R-78E5.0-1.0 | R78E5010 | U5 |
| 2 | CPC1018N | SOP-4_3.8x4.1mm_P2.54mm | U6, U7 |
| 2 | SN74AHCT1G125DBVR | SOT-23-5_HandSoldering | U8, U9 |
| 1 | 74HCT125D,653 74HCT125D | SOIC-14_3.9x8.7mm_P1.27mm | U10 |
| 1 | AP7375-50Y-13 | SOT-89-3_Handsoldering | U11 |
| 1 | ELECTROSMITH_DAISY_SEED_REV7 Electrosmith_Daisy_Seed_Rev7 | Electrosmith_Daisy_Seed | A1 |
| 2 | SI2302-TP | SOT-23_Handsoldering | Q1, Q2 |
| 1 | PWR | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 1 | JACK_IN_R | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2 |
| 1 | JACK_IN_L | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J3 |
| 1 | FW_1 | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J4 |
| 1 | FW2 | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J5 |
| 1 | JACK_OUT_R | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J6 |
| 1 | JACK_OUT_L | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J7 |
| 2 | TQ2SA-L2-5V | TQ2SA | K1, K2 |
| 8 | POT | Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | POT1, POT2, POT3, POT4, POT5, POT6, POT7, POT8 |
| 4 | TP_GND | TestPoint_THTPad_D2.0mm_Drill1.0mm_CUSTOM | TP6, TP7, TP8, TP9 |
| 11 | APA102 | LED_RGB_5050-6 | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +3 |
| 1 | SS14 | D_SMA | D9 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 1N4148W | D_SOD-123 | D12, D13, D15, D16 |
| 1 | 68UH 68uH | SRR7045680M | L1 |
| 18 | 100NF 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C10, C12, C14, C25, C35, C36 +10 |
| 4 | 100NF 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C27, C28, C29 |
| 2 | 1n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5 |
| 2 | 100N 100n | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C6, C7 |
| 4 | 10UF 10uF | CP_Elec_5x5.8 | C8, C9, C16, C18 |
| 1 | 470UF 470uF | CP_Elec_8x10 | C11 |
| 13 | 10UF 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C13, C17, C23, C43, C44, C45, C46, C47 +5 |
| 1 | 2.2UF 2.2uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C15 |
| 1 | 100N 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C19 |
| 2 | 47UF 47uF | CP_Elec_6.3x5.4 | C20, C21 |
| 1 | 100UF 100uF | CP_Elec_6.3x7.7 | C56 |
| 4 | AC0805FR-072M2L 2M2 Yageo | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R5, R18 |
| 4 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R49, R51, R52 |
| 3 | 47R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R15, R50 |
| 2 | 4K7 4k7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8 |
| 4 | 2M2 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10, R53, R54 |
| 8 | 330R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R12, R21, R22, R26, R27, R28, R29 |
| 2 | 100K 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R14 |
| 4 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16, R17, R19, R20 |
| 2 | 1M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23, R24 |
DaisyTape design files
The KiCad project lives in the FilippoGorini/DaisyTape repository on GitHub; these links point at the commit this page was built from.
DaisyTape: common questions
How big is the DaisyTape PCB?
The DaisyTape measures 100.3 × 82.6 mm, has 4 copper layers and is 1.5842 mm thick.
How many components are on the DaisyTape?
133 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DaisyTape design files?
From the FilippoGorini/DaisyTape repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DaisyTape design in my own project?
The repository has no license, so all rights stay with FilippoGorini. Use it as a reference, and ask the author before reusing the design.