63 open source boards using the SN74AHCT1G125DBVR
Real designs built with the SN74AHCT1G125DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Mist
modern-hobbyist
372.1 × 141.2 mm445 parts2LMIT27Raspberry Pi
Lamoka1/2
bearjhartjen122.7 × 124.8 mm126 parts2LCERN-OHL-W-2.07ESP32
Nul
Choccy-vr
11 × 43.2 mm30 parts4LNo license3ESP32
Esp32-shield can1-can2-kdcan analogin sdcard
MrBlahhhh
98 × 100 mm140 parts4LNo license2- schematic only · 82 partsSTM32
Filament-Guillotine
Zephino
82 partsCC-BY-SA-4.02 ESP32
Wooden Clock - main board
tibm110 × 110 mm183 parts4LNo license1RP2040/RP2350
Aster2350
Amronos
80 × 65 mm121 parts4LApache-2.01Water controller
igorilla666
160 × 110 mm117 parts2LCERN-OHL-S-2.01STM32
Chromapi motherboard
Mowibox
88.1 × 59.4 mm105 parts4LApache-2.01Fsoc txrx-1x2-panel
SharbelMarshi
104.2 × 50 mm73 parts4LNo license1ESP32
Klondike-Connect-4---2026
williamlin108
50 × 60 mm68 parts4LNo license1RP2040/RP2350
CosmicMouse
tylerebowers
55 × 56.4 mm32 parts2LCC-BY-SA-4.01Aesa
tieziyun
192 × 315.1 mm2040 parts4LNo license0Raspberry Pi
Iasis
hydazz
130 × 100 mm636 parts6LApache-2.00STM32
Bornier
bornier-dev
150 × 107.5 mm506 parts4LNo license0RP2040/RP2350
Multiroom amp
rocketreading44
327 × 112 mm312 parts4LNo license0Raspberry Pi
HomeDeck
Kilan777
130 × 105 mm220 parts4LNo license0ESP32
Esp32-autosport
MrBlahhhh
84 × 100 mm178 parts4LNo license0DaisyTape
FilippoGorini
100.3 × 82.6 mm133 parts4LNo license0Raspberry Pi
Thegoose
Marsgate
68.2 × 32 mm117 parts6LNo license0Heart
slogic3d-cloud
161.8 × 152.9 mm103 parts2LMIT0STM32
Garbage Collector
Rouaa-spec
78 × 68 mm98 parts4LMIT0Nts player
beeb
120 × 100 mm94 parts4LApache-2.00ESP32
ESP32 MediaCarrier
xmyoot
100 × 85 mm75 parts2LMIT0Open micro sister
TomBonness
91 × 91 mm73 parts4LCustom license0ESP32
Iris cortex
HeyPCB
80 × 40 mm64 parts4LCERN-OHL-S-2.00RP2040/RP2350
Uart cable tester
Mykola2
135 × 90 mm62 parts2LNo license0Smart keyboard
gwaves
110 × 67 mm55 parts2LNo license0ESP32
Open screen deck
vcazan
59.5 × 108.5 mm55 parts2LMIT0RP2040/RP2350
Keyboard leds
modern-hobbyist
87.7 × 51.5 mm55 parts2LNo license0ESP32
Astra board
verIdyia
60 × 40 mm53 parts2LNo license0ESP32
CO2Monitor
AntoG00
47.7 × 51.2 mm51 parts2LMIT0Raspberry Pi
OpenPrint
dac63701
25 × 25 mm48 parts4LNo license0SMK test board
mburger89
76 × 113.2 mm45 parts2LNo license0RP2040/RP2350
G Pad Max
gav-vdm
100 × 89 mm37 parts2LMIT0CrystalBall
wieslawsoltes
100 × 90 mm30 parts2LNo license0
How designs wire the SN74AHCT1G125DBVR
Read from the KiCad layouts of 44 open source designs, one per repository: what each pin of the SN74AHCT1G125DBVR connects to, and the resistors, capacitors and other passives placed on it.
- The VCC_5 pin has a decoupling capacitor on 38 of 44 designs, most often 100 nF (then 10 µF).
- The OE_1 pin is tied to GND on 40 of 44 designs (a signal on 4).
- The Y_4 pin has a series resistor on 28 of 44 designs, most often 330 Ω (then 33 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OE_1pin 1 | Connected to: GND 91% | — |
| GND_3pin 3 | Connected to: GND 95% | — |
| Y_4pin 4 | Connected to: Signal 100% |
|
| VCC_5pin 5 | Connected to: 5V 93% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Aqp moda HC by fvdhoef, Hermod left by modern-hobbyist, ZXEVO.1010 (TOP board) by UzixLS and Control Board by briandorey.
The SN74AHCT1G125DBVR in open source designs
The gallery holds 63 open source boards using the SN74AHCT1G125DBVR from 46 GitHub repositories; a typical one measures about 88.1 × 85 mm and carries around 75 components.
52% are two-layer designs, the rest use four layers or more, and 49% carry an open source license.
The most starred is Aqp moda KBD by fvdhoef.
Parts used alongside the SN74AHCT1G125DBVR
Microcontrollers on boards using the SN74AHCT1G125DBVR
What boards using the SN74AHCT1G125DBVR are built for
SN74AHCT1G125DBVR: common questions
Where can I find a SN74AHCT1G125DBVR reference design?
Each of the 63 boards on this page is a real design using the SN74AHCT1G125DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74AHCT1G125DBVR VCC_5 pin?
The VCC_5 pin has a decoupling capacitor on 38 of 44 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 44 open source designs using the SN74AHCT1G125DBVR.
How is the SN74AHCT1G125DBVR OE_1 pin connected?
The OE_1 pin is tied to GND on 40 of 44 designs (a signal on 4). Counted from the KiCad layouts of 44 open source designs using the SN74AHCT1G125DBVR.
What resistor goes on the SN74AHCT1G125DBVR Y_4 pin?
The Y_4 pin has a series resistor on 28 of 44 designs, most often 330 Ω (then 33 Ω). Counted from the KiCad layouts of 44 open source designs using the SN74AHCT1G125DBVR.
What parts are used alongside the SN74AHCT1G125DBVR?
The USBLC6-2SC6, AMS1117-3.3, RP2354A, SRV05-4 and ESP32-S3-WROOM-1-N16R8 appear in the most repositories here.
Which microcontrollers do boards using the SN74AHCT1G125DBVR use?
Most are built on ESP32 (23), RP2040/RP2350 (8), STM32 (8) and Raspberry Pi (7).
How big is a typical board using the SN74AHCT1G125DBVR?
The median is 88.1 × 85 mm, and 52% are two-layer designs.
What is the most popular open source board using the SN74AHCT1G125DBVR?
By GitHub stars, Aqp moda KBD by fvdhoef, with 60 stars.
Can I simulate one of these boards using the SN74AHCT1G125DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.