ICPDriver
About the ICPDriver PCB
ICPDriver is an open source PCB design by Firestorm108, published on GitHub. It is a 2-layer board measuring 62.7 × 67.1 mm, with 20 components from 13 distinct parts.
Other key parts include the IPT007N06N(TOKMAS). By type, the board carries 7 capacitors, 4 connectors, 4 resistors, 2 ICs, 1 transistor and 1 inductor.
From the project
a plasma cleaner
Purge is a specialized type of plasma cleaner. There are zero electrodes in the vacuum chamber, meaning the sterility levels are very high, atomically sterile even. There are three stages to the process.
Main components on the ICPDriver
ICPDriver bill of materials (BOM)
20 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | IPT007N06N(TOKMAS) IPT007N06N Tokmas(托克马斯) | HSOF-8_IPT007N06N | U1, U2 |
| 1 | FDA18N50 | TO-247-3_Vertical | Q1 |
| 1 | C475108 ICP Primary | CONN-TH_P10.16_KF135T-10.16-2P | J1 |
| 1 | C475108 Plasma Flame | CONN-TH_P10.16_KF135T-10.16-2P | J2 |
| 1 | C475108 VIN | CONN-TH_P10.16_KF135T-10.16-2P | J4 |
| 1 | C475108 SIG | CONN-TH_P10.16_KF135T-10.16-2P | J5 |
| 1 | 10K | RES-ADJ-TH_RK1631110U1Q | RV1 |
| 1 | C475108 10uH | CONN-TH_P10.16_KF135T-10.16-2P | L1 |
| 1 | C13832 1uF 100V | C_1206_3216Metric | C1 |
| 2 | C692321 450V 4.7nF | C_1812_4532Metric | C2, C3 |
| 4 | 6kV 33pF | C_Disc_D7.5mm_W5.0mm_P7.50mm | C4, C5, C6, C7 |
| 2 | C54315 1K 0.5W | R_2512_6332Metric | R1, R2 |
| 2 | C25804 10K | R_0603_1608Metric | R3, R4 |
ICPDriver design files
The KiCad project lives in the Firestorm108/purge repository on GitHub; these links point at the commit this page was built from.
ICPDriver: common questions
How big is the ICPDriver PCB?
The ICPDriver measures 62.7 × 67.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ICPDriver?
20 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ICPDriver design files?
From the Firestorm108/purge repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ICPDriver design in my own project?
The repository has no license, so all rights stay with Firestorm108. Use it as a reference, and ask the author before reusing the design.
