Jbl-305p custom amp build
Fizan-Feroz·jbl-305p-custom-amp-build·new/305P_Crossover.kicad_pcb
About the Jbl-305p custom amp build PCB
Jbl-305p custom amp build is an open source PCB design by Fizan-Feroz, published on GitHub. It is a 2-layer board measuring 80 × 100 mm, with 43 components from 16 distinct parts.
Other key parts include the NE5532. By type, the board carries 8 capacitors, 8 resistors, 3 ICs and 3 connectors.
Main components on the Jbl-305p custom amp build
Jbl-305p custom amp build bill of materials (BOM)
43 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | NE5532 | DIP-8_W7.62mm | U1, U2, U3 |
| 1 | RCA_IN | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Woofer_Out | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Tweeter_Out | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 6 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C_DEC1, C_DEC2, C_DEC3, C_DEC4, C_DEC5, C_DEC6 |
| 1 | 10kA Master | Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 10kA LF Level | Potentiometer_Bourns_3296W_Vertical | RV2 |
| 1 | 10kA HF Level | Potentiometer_Bourns_3296W_Vertical | RV3 |
| 1 | 15k 1% | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R_ATT1 |
| 1 | 9.1k 1% | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R_ATT2 |
| 2 | 1.52k 1% | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R_F1, R_F4 |
| 2 | 12.1k 1% | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R_F2, R_F5 |
| 2 | 240 1% | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R_F3, R_F6 |
| 4 | 10k 1% | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R_G1, R_G2, R_G3, R_G4 |
| 8 | 10nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8 |
| 8 | 9.24k 1% | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 |
Jbl-305p custom amp build design files
The KiCad project lives in the Fizan-Feroz/jbl-305p-custom-amp-build repository on GitHub; these links point at the commit this page was built from.
- Layoutnew/305P_Crossover.kicad_pcb
- Schematicnew/305P_Crossover.kicad_sch
Jbl-305p custom amp build: common questions
How big is the Jbl-305p custom amp build PCB?
The Jbl-305p custom amp build measures 80 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Jbl-305p custom amp build?
43 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Jbl-305p custom amp build design files?
From the Fizan-Feroz/jbl-305p-custom-amp-build repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Jbl-305p custom amp build design in my own project?
The repository has no license, so all rights stay with Fizan-Feroz. Use it as a reference, and ask the author before reusing the design.