Snes smart home
forg3·snes-smart-home·hardware/02_LEVEL_SHIFTERS_AND_FLASH.kicad_sch

About the Snes smart home PCB
Snes smart home is an open source PCB design by forg3, published on GitHub. It is a board, with 9 components from 5 distinct parts.
Other key parts include the 74LVC541APW, SN74LVC8T245PWR and SST39VF040-70-4C-WHE. By type, the board carries 4 ICs, 4 capacitors and 1 resistor.
It belongs with the iot & wireless designs in this gallery.
From the project
Super Famicom / SNES Smart Home & Diagnostics Cartridge (RP2350B + ESP32-C6 + PVSnesLib)
Custom smart cartridge for the Super Famicom / SNES (SHVC-001) console with bidirectional Home Assistant integration, bench telemetry, Wi-Fi 6 / BLE / Thread connectivity, and industrial expansion bus.
Designed to run on real hardware and emulators, with a 100% data-driven architecture: the ROM does not assume beforehand how many or what devices exist in the house.
Main components on the Snes smart home
Snes smart home bill of materials (BOM)
9 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74LVC541APW Nexperia | TSSOP-20_4.4x6.5mm_P0.65mm | U2, U3 |
| 1 | SN74LVC8T245PWR Texas Instruments | TSSOP-24_4.4x7.8mm_P0.65mm | U4 |
| 1 | SST39VF040-70-4C-WHE Microchip | TSOP-32_8x14mm_P0.5mm | U5 |
| 4 | C14663 100nF Murata | C_0402_1005Metric | C6, C7, C8, C9 |
| 1 | C25804 10k Uniroyal | R_0402_1005Metric | R7 |
Snes smart home design files
The KiCad project lives in the forg3/snes-smart-home repository on GitHub; these links point at the commit this page was built from.
Snes smart home: common questions
How many components are on the Snes smart home?
9 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Snes smart home design files?
From the forg3/snes-smart-home repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the Snes smart home design in my own project?
The repository has no license, so all rights stay with forg3. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kL0 USB
Luos-io
20.3 × 15.3 mm19 parts2LMIT547Breakout board
Luos-io
26.7 × 27.9 mm29 parts2LMIT547Stm32f0 disco Luos shield
Luos-io
55.9 × 99.1 mm26 parts2LMIT547L0 USBA
Luos-io
20.3 × 15.3 mm19 parts2LMIT547