41 open source boards using the SN74LVC8T245PWR

Real designs built with the SN74LVC8T245PWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

41 boardsClear filters|Most starred

How designs wire the SN74LVC8T245PWR

Read from the KiCad layouts of 31 open source designs, one per repository: what each pin of the SN74LVC8T245PWR connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCB pins have a decoupling capacitor on 24 of 30 designs, most often 100 nF (then 1 µF).
  • The VCCA pin has a decoupling capacitor on 20 of 30 designs, most often 100 nF (then 1 µF).
VCCApin 1Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 67% · 100 nF (21), 1 µF (3), 22 nF (1)
GNDpin 11, 12, 13Connected to: GND 93%
B4pin 18Connected to: A connector 23%
  • Series resistor on 30% · 47 Ω (2), 1 kΩ (1), 220 Ω (1)
VCCBpin 23, 24Connected to: 5V 75% · a signal 25%
  • Decoupling capacitor on 80% · 100 nF (44), 1 µF (5), 10 nF (4)

17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pulse shaping extension v1.1 by MKesenheimer, Zs1100a by zscircuits, OreSat Star Tracker Card by oresat and Kinetoscope Cartridge & Flash Board by joeyparrish.

The SN74LVC8T245PWR in open source designs

The gallery holds 41 open source boards using the SN74LVC8T245PWR from 32 GitHub repositories; a typical one measures about 100 × 88.5 mm and carries around 105 components.

69% use four copper layers or more, and 29% carry an open source license.

The most starred is Pulse shaping extension v1.1 by MKesenheimer.

Microcontrollers on boards using the SN74LVC8T245PWR

SN74LVC8T245PWR: common questions

Where can I find a SN74LVC8T245PWR reference design?

Each of the 41 boards on this page is a real design using the SN74LVC8T245PWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the SN74LVC8T245PWR VCCB pin?

The VCCB pins have a decoupling capacitor on 24 of 30 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 31 open source designs using the SN74LVC8T245PWR.

What decoupling capacitors do designs use on the SN74LVC8T245PWR VCCA pin?

The VCCA pin has a decoupling capacitor on 20 of 30 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 31 open source designs using the SN74LVC8T245PWR.

What parts are used alongside the SN74LVC8T245PWR?

The USBLC6-2SC6, SN74AVC4T245PWR, SN74LVC1G04DBVR, TLV62569DBVR and W25Q128JVSIQ appear in the most repositories here.

Which microcontrollers do boards using the SN74LVC8T245PWR use?

Most are built on RP2040/RP2350 (8), FPGA (3), ESP32 (2) and Raspberry Pi (1).

How big is a typical board using the SN74LVC8T245PWR?

The median is 100 × 88.5 mm, and 31% are two-layer designs.

What is the most popular open source board using the SN74LVC8T245PWR?

By GitHub stars, Pulse shaping extension v1.1 by MKesenheimer, with 213 stars.

Can I simulate one of these boards using the SN74LVC8T245PWR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part