NeOsensor-LoRaWANV2
About the NeOsensor-LoRaWANV2 PCB
NeOsensor-LoRaWANV2 is an open source PCB design by fthiebolt, published on GitHub. It is a 2-layer board measuring 49.5 × 49.5 mm, with 26 components from 18 distinct parts.
Other key parts include the OLED1.3_I2C, ATECC508A, AMS1117-3.3 and HTCC-AB01. By type, the board carries 8 resistors, 7 connectors, 4 ICs, 4 capacitors and 1 switch.
It belongs with the iot & wireless designs in this gallery.
From the project
neOCampus Arduino | home of the neOSensors end-devices
This repository provides support for the following neOCampus boards: neOSensor boards based on ESP32 neOSensor-AirQuality board (ESP32) from CNRS' LCC lab. * neOSensor boards based on ESP8266 (rev. >= V2)
All this work was undertaken at Université Toulouse 3 / IRIT laboratory in the context of the neOCampus operation.
We added support to our neOCampus IoT management infrastructure named sensOCampus to enable a central configuration for all of our neOSensor boards; these boards will then be able to publish their data to our infrastructure and to have those data stored in our databases.
Main components on the NeOsensor-LoRaWANV2
NeOsensor-LoRaWANV2 bill of materials (BOM)
26 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OLED1.3_I2C | OLED1.3_I2C | U1 |
| 1 | ATECC508A | SOIC-8_3.9x5.4mm_P1.27mm_HandSolder | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | HTCC-AB01 | HTCC-AB01 | U4 |
| 5 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J1, J3, J5, J6, J7 |
| 1 | Conn_01x02 | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | IRsensor | IRsensor_TH_and_smd | IR1 |
| 1 | HC-SR01 | PIR_HC-SR01 | IR2 |
| 1 | G71Y | G71Y_µsw_smd | SW1 |
| 1 | 1uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | 100n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2 |
| 1 | 100µF 6.3v | CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 3 | 15k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R6 |
| 2 | 4K7 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R4 |
| 2 | 470 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5, R8 |
| 1 | 47K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7 |
NeOsensor-LoRaWANV2 design files
The KiCad project lives in the fthiebolt/neOCampus-arduino repository on GitHub; these links point at the commit this page was built from.
NeOsensor-LoRaWANV2: common questions
How big is the NeOsensor-LoRaWANV2 PCB?
The NeOsensor-LoRaWANV2 measures 49.5 × 49.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the NeOsensor-LoRaWANV2?
26 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the NeOsensor-LoRaWANV2 design files?
From the fthiebolt/neOCampus-arduino repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the NeOsensor-LoRaWANV2 design in my own project?
The repository has no license, so all rights stay with fthiebolt. Use it as a reference, and ask the author before reusing the design.
More boards in neOCampus-arduino
ESP8266NeOSensorV4 panel
98.8 × 97.4 mm46 parts2LNo license5
ESP8266Pcbv4
49 × 35.4 mm46 parts2LNo license5
ESP32NeOSensorv5 panelized
100 × 100 mm45 parts2LNo license5
ESP32NeOSensorV5
49.5 × 49.5 mm45 parts2LNo license5
ESP32NeOClock
200 × 80 mm43 parts2LNo license5
Pcbv4-temp
22.1 × 14.2 mm4 parts2LNo license5
Similar boards
RPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k
L0 IMU MPU9250
Luos-io
20.3 × 15.2 mm7 parts2LMIT547
L0 USBA
20.3 × 15.3 mm19 parts2LMIT547
L0 Controller motor
20.3 × 15.3 mm11 parts2LMIT547
L0 Dynamixel
20.3 × 15.2 mm15 parts2LMIT547
L0 stepper driver
20.3 × 15.2 mm18 parts2LMIT547