Switchero
FunkFeuer·switchero-pcb
About the Switchero PCB
Switchero is an open source PCB design by FunkFeuer, published on GitHub under the Custom license license. It is a 2-layer board measuring 62 × 61 mm, with 27 components from 11 distinct parts.
Other key parts include the MCP23017 and MIC2505. By type, the board carries 9 ICs, 8 capacitors, 7 connectors and 3 resistors.
From the project
Power switching PCB for the community housing
Originally created by @wnagele and @oe1rfc for switching USB power supplies of embedded boards in the FunkFeuer Wien Housing.
Front and back of an assembled board (pardon the "questionable" soldering work):
Mounted with daisy chained I2C for the housing project:

Main components on the Switchero
Switchero bill of materials (BOM)
27 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP23017 | SSOP-28_5.3x10.2mm_Pitch0.65mm | U1 |
| 8 | MIC2505 | SOIC-8-N | U2, U3, U4, U5, U6, U7, U8, U9 |
| 1 | ADDR | SW_DIP_x3_W7.62mm_Slide | P1 |
| 1 | I2C_IN | JST_EH_B03B-EH-A_03x2.50mm_Straight | P2 |
| 1 | PWR | conn_hdd_15-24-4449 | P3 |
| 1 | INT | JST_EH_B03B-EH-A_03x2.50mm_Straight | P4 |
| 1 | OUT2 | TerminalBlock_WAGO-236_2Stift_RM5mm_8pol | P5 |
| 1 | OUT1 | TerminalBlock_WAGO-236_2Stift_RM5mm_8pol | P6 |
| 1 | I2C_OUT | JST_EH_B03B-EH-A_03x2.50mm_Straight | P7 |
| 8 | 0.1u | C_0603 | C1, C2, C3, C4, C5, C6, C7, C8 |
| 3 | 4.7k | R_0603 | R1, R2, R3 |
Switchero design files
The KiCad project lives in the FunkFeuer/switchero-pcb repository on GitHub; these links point at the commit this page was built from.
- Layoutswitchero.kicad_pcb
Switchero: common questions
How big is the Switchero PCB?
The Switchero measures 62 × 61 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Switchero?
27 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Switchero design files?
From the FunkFeuer/switchero-pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Switchero design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.