Super cat game
About the Super cat game PCB
Super cat game is an open source PCB design by furballroller, published on GitHub. It is a 2-layer board measuring 71.5 × 76.9 mm, with 22 components from 14 distinct parts.
Other key parts include the SN74LV1T34DBV. By type, the board carries 6 capacitors, 4 resistors, 1 IC and 1 connector.
It belongs with the displays & leds and iot & wireless designs in this gallery.
From the project
A pressure-sensitive LED mat for an ESP32 S3 Devkit clone. This is my first proper hardware project!
- 3D-printed case on Onshape (proper assembly instructions below) - KiCAD Project - Arduino Sketches (PlatformIO IDE)
Cat silhouette traced from this photo: ID 115652480 @ Octavian Mihai Lazar | Dreamstime.com
So basically my friend had a cat, and I was just getting into arduino electronics, so I wanted to make a chasing game for the both of them! I ended up deciding on a pressure-sensitive LED mat, for an interactive laser-pointer kind-of game, with wifi connectivity for convenience. It could be nice to use regularly to keep your pets fit, but really this is just a fun beginner project to…
Main components on the Super cat game
Super cat game bill of materials (BOM)
22 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SN74LV1T34DBV | SOT-23-5_HandSoldering | U1 |
| 1 | CONN_02X14_ODD_EVEN Conn_02x14_Odd_Even | HDR-TH_28P-P2.54-H-M-R2-C14-S2.54 | J1 |
| 2 | CONN_02X08_ODD_EVEN Conn_02x08_Odd_Even | IDC-TH_16P-P2.54_C3406 | JA1, JB1 |
| 2 | FH2.54-09-22PZD XUNPU(讯普) | HDR-TH_22P-P2.54-V-M | JL1, JR1 |
| 1 | SCREW_TERMINAL_01X03 Screw_Terminal_01x03 | CONN-TH_3P-P2.54_KF128-2.54-3P | JLED1 |
| 1 | KF128-2.54-2P KEFA(科发) | CONN-TH_P2.54_KF128-2.54-2P | JPWR1 |
| 1 | 3362P-1-203 3362P-1-203_C118933 BOCHEN(博晨) | RES-ADJ-TH_3P-L7.1-W6.9-P2.50-L_3362P | RV1 |
| 2 | CD74HC4067SM96 TI(德州仪器) | SSOP-24_L8.1-W5.3-P0.65-LS7.8-BL | UA2, UB2 |
| 1 | TYPE-C 6P SHOU HAN(首韩) | TYPE-C-SMD_TYPE-C-6P_1 | USB1 |
| 5 | 100N 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C9 |
| 1 | 1000U 1000u | cap_flat | C5 |
| 2 | 5.1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | 330 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 3.3K 3.3k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
Super cat game design files
The KiCad project lives in the furballroller/super_cat_game repository on GitHub; these links point at the commit this page was built from.
Super cat game: common questions
How big is the Super cat game PCB?
The Super cat game measures 71.5 × 76.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Super cat game?
22 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Super cat game design files?
From the furballroller/super_cat_game repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Super cat game design in my own project?
The repository has no license, so all rights stay with furballroller. Use it as a reference, and ask the author before reusing the design.
Similar boards
View screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
LevelShifterBreakout
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k