Minidrone
g951753321·minidrone·design/gen1/kicad/minidrone.kicad_pcb
About the Minidrone PCB
Minidrone is an open source STM32 PCB design by g951753321, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 78.9 × 97.5 mm, with 70 components from 34 distinct parts.
Its main chip is the STM32F103CBTX, from the STM32 family. Other key parts include the LM1117MP-3.3. By type, the board carries 18 resistors, 16 capacitors, 11 connectors, 10 diodes, 4 modules and 4 transistors.
It belongs with the robotics & motion designs in this gallery.
From the project
Mini drone project base on Zephyr RTOS
This project is a complex project that involves the firmware development, the schematic, and PCB design for a mini drone.
The firmware development is done using the Zephyr RTOS. The firmware includes the control algorithms for the drone, and the communication with the MicroBlue application.
To setup the Zephyr RTOS, follow the instructions in the Zephyr RTOS documentation.
Main components on the Minidrone
Minidrone bill of materials (BOM)
70 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM1117MP-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | STM32F103CBTX STM32F103CBTx | LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | BR | PinHeader_1x02_P2.54mm_Horizontal | M1 |
| 1 | BL | PinHeader_1x02_P2.54mm_Horizontal | M2 |
| 1 | FR | PinHeader_1x02_P2.54mm_Horizontal | M3 |
| 1 | FL | PinHeader_1x02_P2.54mm_Horizontal | M4 |
| 4 | SI2302 | SOT23 | Q1, Q2, Q3, Q4 |
| 1 | 8MHZ 8MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | 32,768KHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 2 | BAT | PinHeader_1x02_P2.54mm_Horizontal | J1, J5 |
| 1 | HM-13 Bluetooth | PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | programming | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | MPU6050 mpu6050 | PinSocket_1x04_P2.54mm_Vertical | J4 |
| 1 | place_holder | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | CONN_02X04_ODD_EVEN Conn_02x04_Odd_Even | PinHeader_2x04_P2.54mm_Vertical | J7 |
| 1 | J-Link | PinHeader_1x04_P2.54mm_Horizontal | J8 |
| 2 | CONN_01X20 Conn_01x20 | PinHeader_1x20_P2.54mm_Vertical | J9, J10 |
| 1 | jumper | PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | SW_DIP_X02 SW_DIP_x02 | SW_DIP_SPSTx02_Slide_Omron_A6H-2101_W6.15mm_P1.27mm | SW1 |
| 1 | SW_Push | SW_SPST_TL3342 | SW2 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | V_sw | SW_CK_JS202011CQN_DPDT_Straight | SW3 |
| 4 | LED | LED_0603_1608Metric | D1, D2, D3, D4 |
| 4 | 1N4007 | D_SMA | D5, D6, D7, D8 |
| 2 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D9, D10 |
| 4 | 10 uF | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1, C3, C4, C6 |
| 7 | 0.1 uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C5, C7, C9, C10, C11, C12 |
| 1 | 1 uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8 |
| 2 | 20 pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13, C15 |
| 2 | 12 pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C16 |
| 2 | 30 K | R_0603_1608Metric | R1, R6 |
| 4 | 180 | R_0603_1608Metric | R2, R3, R4, R5 |
| 8 | 10 K | R_0603_1608Metric | R7, R8, R9, R10, R11, R12, R14, R15 |
| 2 | 1 K | R_0603_1608Metric | R13, R16 |
| 2 | 100 K | R_0603_1608Metric | R17, R18 |
Minidrone design files
The KiCad project lives in the g951753321/minidrone repository on GitHub; these links point at the commit this page was built from.
Minidrone: common questions
What microcontroller does the Minidrone use?
The Minidrone is built around the STM32F103CBTX, from the STM32 family.
How big is the Minidrone PCB?
The Minidrone measures 78.9 × 97.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Minidrone?
70 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Minidrone design files?
From the g951753321/minidrone repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Minidrone design in my own project?
Yes, under the terms of its Apache-2.0 license, which g951753321 chose for the repository.
Can I test firmware for the Minidrone without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k