Gdoor
About the Gdoor PCB
Gdoor is an open source PCB design by gdoor-org, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 32.8 × 36.3 mm, with 64 components from 28 distinct parts.
Other key parts include the C7972 and C7955. By type, the board carries 34 resistors, 20 capacitors, 3 ICs, 3 connectors, 2 transistors and 2 diodes.
It belongs with the iot & wireless designs in this gallery.
From the project
Wifi adapter and bus protocol documentation for the Gira TKS Door System
More information about the firmware are located on the GDoor Homepage.
Main components on the Gdoor
Gdoor bill of materials (BOM)
64 components, 28 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | C7972 LMV321 | SOT-23-5 | U2, U3 |
| 1 | C7955 LM393 | SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | C8326 MMBT5401 | SOT-23 | Q1 |
| 1 | C8512 MMBT2222A | SOT-23 | Q2 |
| 1 | C695629 PlugIn_Terminal_Screw | anschlussklemme2x1_3_5 | J1 |
| 1 | C7501280 ESP_left | PinHeader_2x10_P2.54mm_Vertical | J2 |
| 1 | C7501280 ESP_right | PinHeader_2x10_P2.54mm_Vertical | J3 |
| 1 | C2488 MB10S | SOIC-4_4.55x3.7mm_P2.54mm | D1 |
| 1 | C2480 SS14 | D_SMA | D2 |
| 1 | C1622 47n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 5 | C14858 100p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C4, C8, C9, C18 |
| 9 | C307331 100n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C5, C6, C7, C11, C13, C15, C16 +1 |
| 1 | C1588 1n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10 |
| 2 | C96446 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12, C14 |
| 2 | C15008 100u | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C19, C20 |
| 2 | C22795 130k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R20 |
| 1 | C31850 22k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 4 | C23254 82k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R18, R19 |
| 4 | C23186 5k1 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R7, R16, R17 |
| 5 | C25810 18k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R10, R15, R22, R33 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | C25744 10k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8, R13, R29, R31 |
| 3 | C25819 47k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R28, R30 |
| 3 | C25804 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R23, R24 |
| 2 | C22940 2k4 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R25 |
| 1 | C21190 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 3 | C23162 4k7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R26, R27 |
| 1 | C25803 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R32 |
| 1 | C21189 0 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R34 |
Gdoor design files
The KiCad project lives in the gdoor-org/gdoor repository on GitHub; these links point at the commit this page was built from.
Gdoor: common questions
How big is the Gdoor PCB?
The Gdoor measures 32.8 × 36.3 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Gdoor?
64 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Gdoor design files?
From the gdoor-org/gdoor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Gdoor design in my own project?
Yes, under the terms of its GPL-3.0 license, which gdoor-org chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
RPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k
L0 USB
Luos-io
20.3 × 15.3 mm19 parts2LMIT547
Breakout board
26.7 × 27.9 mm29 parts2LMIT547
Stm32f0 disco Luos shield
55.9 × 99.1 mm26 parts2LMIT547
L0 USBA
20.3 × 15.3 mm19 parts2LMIT547