Right control
About the Right control PCB
Right control is an open source PCB design by geek-rabb1t, published on GitHub under the MIT license. It is a 2-layer board measuring 57.5 × 69.3 mm, with 12 components from 10 distinct parts.
Other key parts include the Pro Micro. By type, the board carries 4 connectors, 2 battery holders, 2 switches, 2 diodes, 1 IC and 1 capacitor.
It belongs with the keyboards designs in this gallery.
From the project
Timothy is a tented split keyboard with lowered thumb cluster.
使いやすさを追求した左右分離型の自作キーボードキットです。 3Dプリント品のケースを採用することで市販品のような形状を実現しています。
キーボードキットや、半完成品は以下のサイトで販売しています。 カスタマイズしたり、ご自身で発注したい場合はこのリポジトリデータをご利用ください。
- キーボードキット： https://geek-rabb1t.booth.pm/items/4213539 - パームレスト： https://geek-rabb1t.booth.pm/items/4214631
case caseの3Dデータ doc ビルドガイド firmware ビルド済みのファームウェアや、各種設定データ gasket ガスケットのカッティングデータ palm-rest パームレストトップのカッティングデータ pcb PCBのデータ * plate スイッチプレートの外形データ
Main components on the Right control
Right control bill of materials (BOM)
12 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Pro Micro | BLE_Micro_Pro | U2 |
| 1 | TRRS | TRRS | J9 |
| 1 | to_thumb | JST_PH_S10B-PH-K_1x10_P2.00mm_Horizontal | J10 |
| 1 | control_to_main_1 | JST_PH_S6B-PH-K_1x06_P2.00mm_Horizontal | J13 |
| 1 | control_to_main_2 | JST_PH_S10B-PH-K_1x10_P2.00mm_Horizontal | J14 |
| 2 | Battery_Cell | CR2032_Holder_SMD | BT3, BT4 |
| 1 | Slide_SW | Slide_Switch_ESD175202 | SW67 |
| 1 | Reset | Tactile_Switch | SW71 |
| 2 | D_Schottky | Shottky_Barrier_Diode | D72, D73 |
| 1 | 100μF | Capacitor | C2 |
Right control design files
The KiCad project lives in the geek-rabb1t/timothy repository on GitHub; these links point at the commit this page was built from.
Right control: common questions
How big is the Right control PCB?
The Right control measures 57.5 × 69.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Right control?
12 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Right control design files?
From the geek-rabb1t/timothy repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Right control design in my own project?
Yes, under the terms of its MIT license, which geek-rabb1t chose for the repository.
More boards in timothy
Similar boards
Lily58 Lite Rev3 TOP Case
kata0510
142.5 × 106.4 mm34 parts2LMIT2.3k
Lily58 Pro BOTTOM
142.5 × 106.3 mm5 parts2LMIT2.3k
Lily58
142.5 × 106.3 mm83 parts2LMIT2.3k
Lily58 Pro
142.5 × 106.3 mm83 parts2LMIT2.3k
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
Pcb top
tompi
132.5 × 95.1 mm18 parts2LCC-BY-4.01.2k