IRL2FA

gemivnet·IRL2FA·hardware/irl2fa.kicad_pcb

IRL2FA PCB layout, top view — open source STM32 board by gemivnet

About the IRL2FA PCB

IRL2FA is an open source STM32 PCB design by gemivnet, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 77 × 31 mm, with 44 components from 25 distinct parts.

Its main chip is the STM32U083KCU6, from the STM32 family. Other key parts include the RV-3032-C7 32.768kHz 2.5ppm-TA-QC. By type, the board carries 19 capacitors, 10 resistors, 5 transistors, 4 diodes, 2 ICs and 1 connector.

It belongs with the displays & leds designs in this gallery.

From the project

Air-gapped key fob that proves the person on the other end is who they say they are, plus offline TOTP codes. Open hardware: STM32U0, e-paper, 5-way joystick, IR pairing.

An air-gapped key fob that proves the person on the other end is who they say they are, and keeps your 2FA codes off your phone.

AI can now clone a voice from a few seconds of audio and write messages in anyone's style. "It's me, I lost my phone, can you send…" is no longer something you can judge by ear. IRL2FA gives two people a shared secret they set up once, in person. From then on, each device shows two words that change every 15 seconds: the word you say and the word you should hear back. If the reply matches, the other person is holding the device you paired with face to face.

IRL2FA, from the project README
From the project README

Main components on the IRL2FA

IRL2FA bill of materials (BOM)

44 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32U083KCU6
STMicroelectronics
U1
1
RV-3032-C7 32.768kHz 2.5ppm-TA-QC
RV-3032-C7
Micro Crystal
U2
2
AO3401A
AOS
Q1, Q2
1
Si1308EDL-T1-GE3
Si1308EDL
Vishay
Q3
1
AO3400A
AOS
Q4
1
VEMT2523SLX01
Vishay
Q5
1
FH34SRJ-24S-0.5SH(50)
FH34SRJ-24S
Hirose
J1
1
MY-2450-01
CR2450
MYOUNG
BT1
1
SKRHABE010
Alps Alpine
SW1
3
MBR0530
JSCJ
D1, D2, D3
1
VSMB2948SL
Vishay
D4
1
ANR3015T470M
47u
APV
L1
2
CL21A476MQYNNNE
47u
Samsung
C1, C2
4
CL05B104KO5NNNC
100n
Samsung
C3, C4, C8, C9
1
CL10A475KO8NNNC
4.7u
Samsung
C5
1
CL05A105KA5NQNC
1u
Samsung
C6
1
CL05B103KB5NNNC
10n
Samsung
C7
2
CL21A475KAQNNNE
4.7u
Samsung
C10, C11
8
CL10A105KB8NNNC
1u
Samsung
C12, C13, C14, C15, C16, C17, C18, C19
3
0402WGF1002TCE
10k
UNI-ROYAL
R1, R2, R10
Show 5 more
QtyPartRefs
2
0402WGF4701TCE
4.7k
UNI-ROYAL
R3, R4
2
0402WGF1003TCE
100k
UNI-ROYAL
R5, R9
1
0402WGF1004TCE
1M
UNI-ROYAL
R6
1
0402WGF220KTCE
2.2
UNI-ROYAL
R7
1
0402WGF1000TCE
100
UNI-ROYAL
R8

IRL2FA design files

The KiCad project lives in the gemivnet/IRL2FA repository on GitHub; these links point at the commit this page was built from.

IRL2FA: common questions

What microcontroller does the IRL2FA use?

The IRL2FA is built around the STM32U083KCU6, from the STM32 family.

How big is the IRL2FA PCB?

The IRL2FA measures 77 × 31 mm, has 2 copper layers and is 0.8 mm thick.

How many components are on the IRL2FA?

44 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the IRL2FA design files?

From the gemivnet/IRL2FA repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the IRL2FA design in my own project?

Yes, under the terms of its AGPL-3.0 license, which gemivnet chose for the repository.

Can I test firmware for the IRL2FA without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards