TigerBass-2
GeuaxTigers·TigerBass-2·hardware/controller-board/Controller_PCB/amplitude_detection.kicad_sch
About the TigerBass-2 PCB
TigerBass-2 is an open source PCB design by GeuaxTigers, published on GitHub. It is a board, with 40 components from 13 distinct parts.
Other key parts include the TLV9064, MCP3008 and TLV9061xDCK. By type, the board carries 23 resistors, 10 capacitors, 4 diodes and 3 ICs.
From the project
KiCad project for the TigerBass 2 controller PCB: the microcontroller, the external ADC and its front end, the string drive, USB, power, and the connectors to everything else in the instrument.
KiCad project for the TigerBass 2 controller PCB: the microcontroller, the external ADC and its front end, the string drive, USB, power, and the connectors to everything else in the instrument.
Status: schematic in progress. The project is ControllerPCB/, made in KiCad 10.0**. CI checks it with the same version.
One sheet per block, so several people can work at once without touching the same file.
Main components on the TigerBass-2
TigerBass-2 bill of materials (BOM)
40 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV9064 | U401 | |
| 1 | MCP3008 | U402 | |
| 1 | TLV9061xDCK | SOT-353_SC-70-5 | U901 |
| 4 | BAT54S | SOT-23 | D401, D402, D403, D404 |
| 9 | 100n | C401, C402, C403, C404, C405, C406, C407, C902 +1 | |
| 1 | 1u | C901 | |
| 4 | 4.7k | R401, R402, R403, R404 | |
| 4 | 1M | R405, R406, R407, R408 | |
| 4 | 10k | R409, R410, R411, R412 | |
| 4 | 22k | R413, R414, R415, R416 | |
| 4 | 1k | R417, R418, R419, R420 | |
| 2 | 100k | R901, R902 | |
| 1 | 47 | R903 |
TigerBass-2 design files
The KiCad project lives in the GeuaxTigers/TigerBass-2 repository on GitHub; these links point at the commit this page was built from.
TigerBass-2: common questions
How many components are on the TigerBass-2?
40 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the TigerBass-2 design files?
From the GeuaxTigers/TigerBass-2 repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the TigerBass-2 design in my own project?
The repository has no license, so all rights stay with GeuaxTigers. Use it as a reference, and ask the author before reusing the design.